Is the Flat wide nozzle for coolant, 3/8" system, JETON compatible with standard coolant hoses and fittings?

Yes . Flat wide nozzle for coolant, 3/8" system, JETON is compatible with standard 3/8" coolant hoses and fittings. Made of acetal and specified for a 3/8" system (size 1.1/4"), it is designed to fit typical coolant line dimensions used in such systems. Its working pressure rating (up to 3 bar) and operating temperature (up to +65Â°C) match common requirements for coolant delivery, so when used with standard 3/8" hoses and compatible connectors the nozzle will function correctly. Ensure your hoses and fittings are rated for the same pressure and temperature and confirm the exact coupling type (push-fit, threaded, etc.) for a secure mechanical match.

Can the Flat wide nozzle for coolant, 3/8" system, JETON withstand continuous use at its maximum recommended pressure and temperature?

Yes. The Flat wide nozzle for coolant, 3/8" system, JETON can withstand continuous use at its maximum recommended parameters: working pressure up to 3 bar and operating temperature up to +65Â°C. Its acetal construction is suitable for these conditions, provided the nozzle is used within the specified limits and installed correctly.

Does the Flat wide nozzle for coolant, 3/8" system, JETON require specific hose inner diameter for optimal seal?

Yes. The Flat wide nozzle for coolant, 3/8" system, JETON requires a hose with an inner diameter matched to the 3/8" system connection to ensure an optimal seal. Because the nozzle is designed for the 3/8" (â9.5 mm) modular coolant system and made of acetal, using a hose with the correct inner diameter prevents leaks and ensures proper fit under working pressure (up to 3 bar) and operating temperatures (up to +65Â°C). If the hose ID is too large the fit will be loose and leak; if too small it will be difficult to assemble or may deform the nozzle seat. For best results use hoses and fittings specified for the 3/8" JETON system or check manufacturer tolerances for a precise match.

Flat wide nozzle for coolant, 3/8″ system, JETON

Air and water hoses, All products/

Additional information

Wide flat nozzle for coolant hoses JETON – 3/8″ system. Available in size 1.1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry
JT-83037	Flat nozzle with a gap of 32.1x3.2 mm (3/8" system)	-	3

Wide flat nozzle for coolant hoses JETON – 3/8″ system. Available in size 1.1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.