Is Industrial water and air hose TUBES 2116 T suitable for hot-water floor and outdoor cleaning despite not being oil-resistant?

Yes. Industrial water and air hose TUBES 2116 T is suitable for hot-water floor washing and outdoor cleaning. The product description explicitly states it is "widely used for washing floors and industrial equipment with hot water" and "also suitable for outdoor use," confirming intended application. Key supportive features: - Inner layer: white EPDM rubber . good hot-water resistance and hygiene properties. - Reinforcement: polyester braid . provides strength and flexibility. - Outer layer: micro-perforated EPDM rubber, resistant to weather and abrasion . fits outdoor use. - Operating temperature: â40Â°C to +100Â°C . safe for typical hot-water cleaning. - Working pressure: 10 bar . adequate for many cleaning systems. Caveat: It is not oil-resistant and is "not recommended for air with oil mist." Avoid contact with oils, fuels, hydraulic fluids, or use on compressed air lines carrying oil mist; otherwise performance for hot-water floor and outdoor cleaning will be appropriate.

Can Industrial water and air hose TUBES 2116 T withstand outdoor weather and abrasion during hot-water floor cleaning?

Yes. Industrial water and air hose TUBES 2116 T is suitable for outdoor use and for hot-water floor cleaning. The description states it is widely used for washing floors and industrial equipment with hot water, is resistant to weather conditions and abrasion, and is rated for temperatures from -40Â°C to +100Â°C with a working pressure of 10 bar. Note: it is not resistant to oil and not recommended for compressed air with oil mist.

Does Industrial water and air hose TUBES 2116 T perform well with hot-water cleaning despite its non-oil resistance?

Yes. Industrial water and air hose TUBES 2116 T performs well with hot-water cleaning despite not being oil resistant. The product description explicitly states it is "widely used for washing floors and industrial equipment with hot water" and lists an operating temperature up to +100Â°C, which covers typical hot-water cleaning applications. Its construction (white EPDM inner layer, polyester braid reinforcement, micro-perforated EPDM outer layer) provides good resistance to weather and abrasion, suitable for outdoor and mechanical cleaning duties. Limitations: do not use Industrial water and air hose TUBES 2116 T where oil contact or oil-laden air is present. it is not oil resistant and is "not recommended for air with oil mist." For hot-water cleaning involving detergents, solvents, or oil-contaminated surfaces, verify chemical compatibility before use. Otherwise, for straightforward hot-water washing, this hose is appropriate and safe.

Industrial water and air hose TUBES 2116 T

Air and water hoses, All products/

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	20, 30, 40, 50
Reinforcement	polyester braid

Widely used for washing floors and industrial equipment with hot water. Also suitable for outdoor use. Resistant to weather conditions and abrasion. Not resistant to oil, not recommended for air with oil mist. Compared to the “Tubes 2116,” it has a thicker wall. Inner layer: white EPDM rubber. Reinforcement: polyester braid. Outer layer: red or blue micro-perforated EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
PR-TU2116T-13BL	Hose TUBES 2116 T 13x23 mm, blue	12	10
PR-TU2116T-13R	Hose TUBES 2116 T 13x23 mm, red	12	10
PR-TU2116T-16BL	Hose TUBES 2116 T 16x28 mm, blue	16	10
PR-TU2116T-16R	Hose TUBES 2116 T 16x28 mm, red	16	10
PR-TU2116T-19BL	Hose TUBES 2116 T 19x32 mm, blue	20	10
PR-TU2116T-19R	Hose TUBES 2116 T 19x32 mm, red	20	10
PR-TU2116T-25BL	Hose TUBES 2116 T 25x39 mm, blue	25	10
PR-TU2116T-25R	Hose TUBES 2116 T 25x39 mm, red	25	10

Widely used for washing floors and industrial equipment with hot water. Also suitable for outdoor use. Resistant to weather conditions and abrasion. Not resistant to oil, not recommended for air with oil mist. Compared to the “Tubes 2116,” it has a thicker wall. Inner layer: white EPDM rubber. Reinforcement: polyester braid. Outer layer: red or blue micro-perforated EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.

Additional information

Material	EPDM – ethylene-propylene-diene rubber
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	20, 30, 40, 50
Reinforcement	polyester braid