Is the Flat narrow nozzle for coolant, 1/4" system, JETON suitable for continuous use at pressures up to 3 bar and temperatures up to +65Â°C?

Yes. Based on the provided description, the Flat narrow nozzle for coolant, 1/4" system, JETON is suitable for continuous use at pressures up to 3 bar and temperatures up to +65Â°C. Its material (acetal) and stated working pressure and operating temperature indicate it is designed to perform under those conditions. Ensure installation and system compatibility match these limits; do not exceed 3 bar or +65Â°C for safe, continuous operation.

Can the Flat narrow nozzle for coolant, 1/4" system, JETON withstand exposure to common machining coolants and fluids without degrading?

Flat narrow nozzle for coolant, 1/4" system, JETON is made of acetal (POM), which offers good chemical resistance to many common machining coolants, water-based emulsions, soluble oils and light cutting fluids. It withstands typical workshop temperatures up to +65Â°C and working pressures up to 3 bar. However, acetal can be attacked over time by strong acids, strong alkalis, certain chlorinated solvents or aggressive degreasers; concentrated fuels and some synthetic oils may also cause swelling or stress cracking in prolonged exposure. For normal use with water-based coolants and standard cutting fluids the nozzle should perform well without significant degradation; for aggressive chemicals verify compatibility with the coolant manufacturer or test a sample before long-term use.

Does the Flat narrow nozzle for coolant, 1/4" system, JETON require special fittings for installation?

No. the Flat narrow nozzle for coolant, 1/4" system, JETON does not require special fittings for installation. It is designed for the 1/4" system and made of acetal, so it mates directly with standard 1/4" coolant hose components used in such modular systems. Ensure hoses and connectors are rated for the working pressure (up to 3 bar) and operating temperature (up to +65Â°C) to maintain a secure, leak-free connection.