Suction – delivery industrial hose for water TORONTO LIGHT®
Suction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| IV-TORONTO-L-019 | Hose TORONTO LIGHT 19x27 mm | 20 | 10 | |
| IV-TORONTO-L-025 | TORONTO LIGHT hose 25x33 mm | 25 | 10 | |
| IV-TORONTO-L-032 | TORONTO LIGHT hose 32x40 mm | 32 | 10 | |
| IV-TORONTO-L-038 | TORONTO LIGHT hose 38x47.5 mm | 38 | 10 | |
| IV-TORONTO-L-040 | TORONTO LIGHT hose 40x49.5 mm | 40 | 10 | |
| IV-TORONTO-L-051 | TORONTO LIGHT hose 51x60.5 mm | 50 | 10 | |
| IV-TORONTO-L-060 | TORONTO LIGHT hose 60x71 mm | 60 | 10 | |
| IV-TORONTO-L-063 | TORONTO LIGHT hose 63.5x75 mm | 65 | 10 | |
| IV-TORONTO-L-070 | Hose TORONTO LIGHT 70x81 mm | 70 | 10 | |
| IV-TORONTO-L-076 | Hose TORONTO LIGHT 76x87 mm | 75 | 10 | |
| IV-TORONTO-L-090 | Hose TORONTO LIGHT 90x102 mm | 90 | 10 | |
| IV-TORONTO-L-102 | TORONTO LIGHT hose 102x114 mm | 100 | 10 | |
| IV-TORONTO-L-110 | Hose TORONTO LIGHT 110x125 mm | 110 | 10 | |
| IV-TORONTO-L-127 | HOSE TORONTO LIGHT 127x143 mm | 125 | 10 | |
| IV-TORONTO-L-152 | Hose TORONTO LIGHT 152x170.5 mm | 150 | 10 | |
| IV-TORONTO-L-203 | Hose TORONTO LIGHT 203x225 mm | 200 | 10 | |
| IV-TORONTO-L-254 | TORONTO LIGHT hose 254x278 mm | 250 | 5 |
Suction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m – contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
Additional information
| Material | SBR – styrene-butadiene rubber |
|---|---|
| Maximum operating temperature [°C] | 70 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | yes |
| Standard length [m] | 60, 60 / 120 |
| Reinforcement | steel spiral, synthetic cover |
Additional information
| Material | SBR – styrene-butadiene rubber |
|---|---|
| Maximum operating temperature [°C] | 70 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | yes |
| Standard length [m] | 60, 60 / 120 |
| Reinforcement | steel spiral, synthetic cover |
