Can the Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 be installed without machining and fit hoses with specified D1, D2, D3 dimensions?

Yes. The Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 is designed for tool-free installation . no machining is required. It fits hoses when the hose outer diameter (D1), inner diameter (D2) and the lock diameter (D3) match the colletâs specified dimensions. Ensure you select the BX7 size that corresponds exactly to your hoseâs D1 (outer), D2 (inner) and D3 (lock) measurements; when those dimensions are compatible, the collet will install correctly and provide proper clamping.

Does the Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 require special tools for installation without machining?

Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 does not require special machining tools for installation. The BX7 clamping sleeve is designed for R6, R7, or R8 hoses with installation specified as "no machining." Standard assembly typically involves selecting the correct sleeve size to match the hose outer diameter (D1), ensuring the inner diameter (D2) and lock diameter (D3) correspond, and using common hand or workshop tools for tightening and securing-no special or bespoke machining equipment is needed. The part is carbon steel, galvanized for corrosion resistance.

Is the Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 compatible with different hose wall thicknesses without machining?

Yes. The Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7 is designed for installation without machining and is specified by three diameters: D1 (outer diameter), D2 (inner diameter) and D3 (lock diameter). Because the sleeve is matched to the hose by these defined diameters and fitted by clamping rather than by material removal, it can accommodate variations in hose wall thickness as long as the hose outer and inner diameters fall within the colletâs specified D1/D2 range and the locking action at D3 can securely engage the hose. In practice this means: if the hoseâs outer diameter matches the colletâs D1 and the inner diameter corresponds to D2 so the locking diameter D3 can grip it, no additional machining is required. If the hose wall thickness variation causes the hose diameters to fall outside those nominal D1/D2/D3 limits, the sleeve will not fit correctly and machining or a different sleeve size would be necessary.

Collet for thermoplastic hoses R6, R7, R8, carbon steel, type BX7

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

BX7 clamping sleeve for thermoplastic hoses type R6, R7, or R8. Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-BX7-03	BX7 sleeve for 3/16" hose (R6, R7, R8)	5	-	In stock	Enquiry
MC-BX7-04	BX7 sleeve for 1/4" hose (R6, R7, R8)	6	-	In stock	Enquiry
MC-BX7-05	BX7 sleeve for 5/16" hose (R6, R7, R8)	8	-	In stock	Enquiry
MC-BX7-06	BX7 sleeve for 3/8" hose (R6, R7, R8)	10	-	In stock	Enquiry
MC-BX7-08	BX7 sleeve for 1/2" hose (R6, R7, R8)	12	-	In stock	Enquiry
MC-BX7-10	BX7 sleeve for 5/8" hose (R6, R7, R8)	16	-	In stock	Enquiry
MC-BX7-12	BX7 sleeve for 3/4" hose (R6, R7, R8)	20	-	In stock	Enquiry
MC-BX7-16	BX7 sleeve for 1" hose (R6, R7)	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

BX7 clamping sleeve for thermoplastic hoses type R6, R7, or R8. Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.