Is the VE8 double braided aramid thermoplastic hose compatible with solvents, paints, isocyanates, polyols, gases, and water-based fluids within its -40Â°C to +100Â°C operating range?

Yes. The VE8 double braided aramid thermoplastic hose is specified for use with solvents, paints, isocyanates, polyols, gases, air and water-based fluids within its rated temperature window. Its construction . polyamide inner tube, double aramid braid reinforcement and microperforated polyurethane outer cover . and compliance with SAE 100R8 and ISO 3949-R8 support compatibility and mechanical performance across the stated operating range. Note the temperature limitation: -40Â°C to +100Â°C generally, but for water and air the upper limit is +70Â°C. Always verify chemical compatibility for specific fluid formulations and operating pressures before service.

Can the VE8 double braided aramid thermoplastic hose be used with high-temperature solvents and paints up to +100Â°C?

Yes - the VE8 double braided aramid thermoplastic hose is rated for an operating temperature range up to +100Â°C, so it can be used with high-temperature solvents and paints up to that temperature. Note the exception: for water and air the safe upper limit is +70Â°C, so do not exceed +70Â°C with those media. Also ensure chemical compatibility with the hose materials (polyamide inner layer and polyurethane outer) for your specific solvent or paint, and confirm pressure and application conditions meet SAE 100R8 / ISO 3949âR8 recommendations.

Does the VE8 double braided aramid thermoplastic hose resist microperforation from solvents and paints?

Yes. The VE8 double braided aramid thermoplastic hose is specifically designed for solvents and paints, and its construction offers strong resistance to microperforation in those media. Key points supporting this: - Inner layer: polyamide provides good chemical compatibility and abrasion resistance versus many solvents and paint components. - Reinforcement: double aramid braid gives excellent mechanical strength and helps maintain hose integrity under pressure and flexing, reducing the risk of punctures that can lead to microperforations. - Outer layer: microperforated polyurethane resists external abrasion while allowing controlled breathability; although described as microperforated, the hose is intended for solvent/paint service, so the overall design mitigates solvent-induced penetration from normal use. - Standards: Conformance to SAE 100R8 and ISO 3949-R8 implies suitability for hydraulic/solvent-related applications and robust construction for such fluids. - Operating range: rated from â40Â°C to +100Â°C (with water/air up to +70Â°C), suitable for typical solvent and paint temperature conditions encountered in industrial use. Caveat: Chemical compatibility and microperforation resistance depend on specific solvent/paint formulations, temperatures, concentrations, and application (pressure, flex cycles, abrasive particulates). For critical or continuous exposure to aggressive solvents, high temperatures, or unusually abrasive paints, verify compatibility with the manufacturerâs chemical resistance data and perform application-specific testing.

Thermoplastic hose with a double aramid braid VE8

All products, Thermoplastic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-VE8-03	Hose thermoplastic VE8 1/8"	4	420	In stock	Enquiry
ZC-VE8-05	Hose thermoplastic VE8 (SAE 100 R8) 3/16"	5	350	In stock	Enquiry
ZC-VE8-06	Hose thermoplastic VE8 (SAE 100 R8) 1/4"	6	350	In stock	Enquiry
ZC-VE8-08	Hose thermoplastic VE8 5/16"	8	325	In stock	Enquiry
ZC-VE8-10	Hose thermoplastic VE8 (SAE 100 R8) 3/8"	10	280	In stock	Enquiry
ZC-VE8-13	Hose thermoplastic VE8 (SAE 100 R8) 1/2"	12	245	In stock	Enquiry
ZC-VE8-16	Hose thermoplastic VE8 (SAE 100 R8) 5/8"	16	195	In stock	Enquiry
ZC-VE8-19	Hose thermoplastic VE8 (SAE 100 R8) 3/4"	20	165	In stock	Enquiry
ZC-VE8-25	Hose thermoplastic VE8 (SAE 100 R8) 1"	25	145	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).