Can Hand crimper TNT8 with hydraulic pump MPT100 crimp angled fittings by passing the crimping head through the hose?

Yes. Hand crimper TNT8 with hydraulic pump MPT100 can crimp angled fittings by passing the crimping head through the hose. The crimping head is specifically designed to be passed through the hose bore, which is essential for properly seating and crimping 90Â° and other angled fittings. The toolâs eight-jaw configuration and included six sets of jaws (for standard and reduced OD hoses: 5/16", 5/16"â13/32", 13/32", 1/2", 1/2"â5/8", and 5/8") cover the common hose sizes used with angled fittings. The manual hydraulic pump provides the specified crimping force at 200 bar, ensuring consistent, reliable crimps when used with the correct jaw set and proper setup.

Does the Hand crimper TNT8 with hydraulic pump MPT100 support crimping hoses with limited access or tight bends?

Yes. Hand crimper TNT8 with hydraulic pump MPT100 supports crimping hoses with limited access or tight bends. Its eight-jaw crimping head is slim and designed to be passed through the hose, which is specifically important for angled fittings and confined spaces. The set includes six jaw sizes covering standard and reduced-OD hoses (5/16", 5/16"â13/32", 1/2", 13/32"â1/2", 1/2"â5/8", and 5/8"), plus a carrying case, and provides the specified crimping force at 200 bar.

Is Hand crimper TNT8 with hydraulic pump MPT100 suitable for crimping very short hose assemblies?

Hand crimper TNT8 with hydraulic pump MPT100 is generally suitable for crimping very short hose assemblies, with some caveats. Dlaczego tak: - Eight-jaw crimping head that can be passed through the hose. kluczowa cecha przy krÃ³tkich przewodach i ksztaÅtowych koÅcÃ³wkach: umoÅ¼liwia dopasowanie gÅowicy bez koniecznoÅci dÅugiego odcinka przewodu. - Zestaw 6 kompletÃ³w szczÄk obejmuje mniejsze Årednice (5/16", 5/16"â13/32", 13/32") oraz kombinacje dla redukowanych Årednic, co zwiÄksza szansÄ na dobranie szczÄk odpowiednich do krÃ³tkich zespoÅÃ³w. - Hydrauliczna pompa generujÄca okreÅlonÄ siÅÄ przy 200 bar daje wystarczajÄcÄ moc do pewnych Årednic i typÃ³w tulei, zwÅaszcza w zastosowaniach mobilnych/serwisowych. Ograniczenia i zalecenia: - âBardzo krÃ³tkiâ oznacza, Å¼e nadal musisz mieÄ minimalnÄ dÅugoÅÄ wystarczajÄcÄ, by umieÅciÄ i poprawnie ustawiÄ tulejÄ oraz szczÄki; choÄ gÅowica moÅ¼e przejÅÄ przez wÄÅ¼, fizyczne manewry przy bardzo krÃ³tkich koÅcÃ³wkach mogÄ byÄ utrudnione. - SprawdÅº kompatybilnoÅÄ szczÄk z konkretnym typem tulei i rozmiarem wÄÅ¼a. zestaw pokrywa typowe rozmiary, ale nietypowe tuleje lub bardzo cienkie/stalowe oploty mogÄ wymagaÄ specjalnych szczÄk. - PrzeprowadÅº prÃ³bne zaciski na identycznej krÃ³tkiej prÃ³bce przed produkcjÄ seryjnÄ, aby upewniÄ siÄ co do jakoÅci zacisku i uniknÄÄ odksztaÅceÅ. W skrÃ³cie: Hand crimper TNT8 with hydraulic pump MPT100 jest wÅaÅciwym wyborem do wielu bardzo krÃ³tkich zespoÅÃ³w wÄÅ¼y dziÄki gÅowicy przechodzÄcej przez wÄÅ¼ i doÅÄczonym szczÄkom, lecz naleÅ¼y potwierdziÄ kompatybilnoÅÄ rozmiaru/tulei i wykonaÄ testy praktyczne.

Hand crimper TNT8 with hydraulic pump MPT100

Additional information

Hand crimping tool TNT8 (eight-jaw crimp) with manual hydraulic pump. The crimping head allows it to be passed through the hose, which is important for crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and reduced outer diameter hoses 5/16″, 5/16″ ÷ 13/32″, 1/2″, 13/32″, 1/2″ ÷ 5/8″, and 5/8″, carrying case. The specified crimping force at 200 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PF-TNT8-MPT10032SE	TNT-8 air conditioning crimping tool with manual drive.	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hand crimping tool TNT8 (eight-jaw crimp) with manual hydraulic pump. The crimping head allows it to be passed through the hose, which is important for crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and reduced outer diameter hoses 5/16″, 5/16″ ÷ 13/32″, 1/2″, 13/32″, 1/2″ ÷ 5/8″, and 5/8″, carrying case. The specified crimping force at 200 bar.