Can the Side nozzle for coolant, 1/2" system, JETON withstand continuous use at 2 bar and +65Â°C without material degradation?

Yes. The Side nozzle for coolant, 1/2" system, JETON is specified with a working pressure up to 2 bar and an operating temperature up to +65Â°C and is made of acetal (POM). Operating at 2 bar and +65Â°C is at the stated maximum limits; acetal generally maintains good mechanical properties, dimensional stability and resistance to aqueous coolants at these conditions. Continuous use at these limits is therefore acceptable provided actual service conditions match the specifications (no higher pressures, temperatures, aggressive chemical exposure, or abrasive particulates). However, because prolonged exposure at the upper limits can accelerate wear, consider periodic inspection for cracking, creep, or chemical attack and allow for a safety margin in critical applications. If exposure includes strong solvents, high concentrations of glycol, or temperatures/pressures above the specified maxima, select a different material or component.

Is the Side nozzle for coolant, 1/2" system, JETON compatible with standard coolant fluids and oils?

Yes. The Side nozzle for coolant, 1/2" system, JETON is made of acetal, a material that is generally resistant to standard water-based coolant fluids and many common soluble oils used in machining. Its specified working pressure (up to 2 bar) and operating temperature (up to +65Â°C) are compatible with typical coolant system conditions. However, aggressive chemical additives, strongly alkaline or acidic fluids, or specialty synthetic oils outside normal machining formulations may affect acetal over time; for such media, confirm chemical compatibility with the fluid supplier or perform material compatibility testing.

What maintenance is recommended for the Side nozzle for coolant, 1/2" system, JETON to ensure longevity?

To ensure longevity of the Side nozzle for coolant, 1/2" system, JETON, follow these maintenance recommendations: 1. Regular cleaning - Flush the nozzle and connected tubing with clean water or compatible coolant regularly to remove deposits, chips and residue. - Disassemble periodically (if applicable) and remove any obstructing particles from the nozzle orifices and internal passages. 2. Inspect seals and connections - Check threads, Oârings and fittings for wear, cracks or leaks. Tighten fittings to proper torque without overâtightening to avoid damaging the acetal body. Replace any degraded seals promptly. 3. Monitor operating conditions - Keep working pressure at or below the specified maximum (2 bar). Avoid pressure spikes that could stress the acetal material. - Maintain fluid temperature below the maximum operating temperature (+65Â°C). 4. Use compatible fluids - Use coolants and cleaning fluids that are chemically compatible with acetal (POM). Avoid strong solvents or chemicals known to attack acetal (e.g., strong acids, certain chlorinated solvents). 5. Prevent mechanical damage - Protect the nozzle from impacts, excessive bending of hoses, or clamping that could crack the acetal body. Mount securely in ring sets or fixtures to avoid vibrationâinduced wear. 6. Replace worn components - Replace the Side nozzle for coolant, 1/2" system, JETON if persistent leaks, deformation, or loss of spray performance occur despite cleaning and seal replacement. 7. Scheduled checks - Implement a periodic inspection schedule based on usage intensity (e.g., weekly for heavy use, monthly for light use) to catch issues early. Following these steps will help maintain performance and extend the service life of the Side nozzle for coolant, 1/2" system, JETON.

Side nozzle for coolant, 1/2″ system, JETON

Air and water hoses, All products/

Additional information

Side nozzle for coolant JETON – 1/2″ system. Enables the construction of, for example, a ring set. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-64622	Side nozzle (1/2" system)	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Side nozzle for coolant JETON – 1/2″ system. Enables the construction of, for example, a ring set. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.