Is the 90Â° round nozzle for coolant, 1/2" system, JETON compatible with standard 1/2" coolant hoses and fittings?

Yes . the 90Â° round nozzle for coolant, 1/2" system, JETON is compatible with standard 1/2" coolant hoses and fittings. The product line is explicitly offered in a 1/2" system size (alongside 1/4" and 3/8"), so the 1/2" version is intended to connect to components sized for a 1/2" system. Made of acetal and rated for working pressure up to 2 bar and temperatures up to +65Â°C, it matches typical requirements for low-pressure coolant hose assemblies. Note: ensure the hose and fittings you plan to use conform to the same 1/2" nominal standard (ID/OD dimensions) and are suitable for the acetal nozzleâs pressure/temperature limits for a reliable seal and safe operation.

Does the 90Â° round nozzle for coolant, 1/2" system, JETON require specific clamps for secure hose attachment?

Based on the provided description of the 90Â° round nozzle for coolant, 1/2" system, JETON, specific clamps are not explicitly required. The nozzle is listed for acetal material, compatible with a 1/2" system, and rated for working pressures up to 2 bar and temperatures up to +65Â°C. For secure hose attachment in typical coolant nozzle systems, it is recommended to use hose clamps or appropriate fittings when: - The hose is not a push-fit or barbed design integrated into the nozzle. - The application involves vibration, axial loads, or pressures near the maximum rating. - A reliable, leak-free connection is critical for safety or process stability. If the nozzle has an integrated barb or push-fit geometry sized to the hose ID for a 1/2" system, a clamp may be optional for low-pressure, stable installations. However, given common workshop practice and to ensure leak-free performance under variable conditions, using a compatible clamp (e.g., stainless steel worm-gear or ear clamp sized for the hose inner/outer diameter) is advisable unless the manufacturer states a clamp is not needed. For definitive guidance, consult JETONâs installation instructions or technical support.

90° round nozzle for coolant, 1/2″ system, JETON

Q: Can the 90Â° round nozzle for coolant, 1/2" system, JETON withstand continuous operation at +65Â°C without performance loss?

Yes. The 90Â° round nozzle for coolant, 1/2" system, JETON is made of acetal and specified for an operating temperature up to +65Â°C. According to the provided specification (working pressure up to 2 bar; operating temperature up to +65Â°C), it can withstand continuous operation at +65Â°C without loss of performance, provided installation and operating pressure remain within the stated limits.

Air and water hoses, All products/

90° round nozzle for coolant, 1/2" system, JETON

Additional information

90° round nozzle for coolant hoses JETON – 1/4″ system. Available in sizes 1/4″, 3/8″, and 1/2″. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JT-84443	90° nozzle 1/4" (1/2" system)	-	2	In stock	Enquiry
JT-84444	Nozzle 90° 3/8" (system 1/2")	-	2	In stock	Enquiry
JT-84445	90° nozzle 1/2" (1/2" system)	-	2	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° round nozzle for coolant hoses JETON – 1/4″ system. Available in sizes 1/4″, 3/8″, and 1/2″. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.