Is the Tee fitting for inch pipe, stainless steel, C764L compatible with AISI 316 tubes and their specified OD/wall thickness for allowable working pressure?

Yes. The Tee fitting for inch pipe, stainless steel, C764L is compatible with AISI 316 tubes when the tube outer diameter (OD) and wall thickness match those listed in the productâs allowable working pressure table. The fitting is expressly intended for connecting inch tubes in chemical, petrochemical, pharmaceutical, energy, nuclear power and process engineering applications and is manufactured from AISI 316 stainless steel, so material compatibility is met. The limiting factor is the tube OD and wall thickness: the allowable working pressure of the Tee fitting is determined from those tube dimensions (see the attachment for specific OD/wall combinations and corresponding pressures). To ensure compatibility in service, verify that the AISI 316 tube OD and wall thickness you plan to use appear in the fittingâs pressure table and that the resulting allowable working pressure meets or exceeds your required system pressure (including applicable safety factors and temperature deratings).

Can the Tee fitting for inch pipe, stainless steel, C764L be used with AISI 316 tubes of varying OD and wall thickness for rated working pressure?

Yes - the Tee fitting for inch pipe, stainless steel, C764L can be used with AISI 316 tubes of varying outer diameter and wall thickness provided the tube dimensions fall within the allowable combinations listed for the LET-LOKÂ® type tee fitting. The allowable working pressure for the fitting is determined by the tube OD and wall thickness (refer to the attachment table). Ensure each tube size/wall thickness combination used matches a rated working pressure entry; do not exceed the specified pressure for that combination. Also verify material compatibility (AISI 316) and follow installation instructions and applicable codes for the intended service.

Does the Tee fitting for inch pipe, stainless steel, C764L support AISI 316 tube dimensions for AW pressure ratings?

Yes. The Tee fitting for inch pipe, stainless steel, C764L supports AISI 316 tube dimensions for allowable working (AW) pressure ratings, provided the tube outer diameter and wall thickness match the dimensions and ratings listed in the fittingâs allowable working pressure chart. The LETâLOKÂ® type tee is specified for connecting inch tubes in chemical, petrochemical, pharmaceutical, energy, nuclear power and process industries, and its allowable working pressure is determined by the tube OD and wall thickness (as given in the attachment). Because the material is AISI 316, the fitting material is compatible with AISI 316 tube dimensions used to derive the AW pressure values. Ensure you select the tube OD and wall thickness combination from the chart that corresponds to the required AW pressure for your application and verify compatibility with any applicable codes or service conditions.

Tee fitting for inch pipe, stainless steel, C764L

All products, LET-LOK precision connectors/

Additional information

Material	SS – stainless steel

LET-LOK® type tee fitting for connecting inch tubes, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HM-LC764L-01-SS	Tee fitting for 1/16" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-02-SS	Tee fitting for 1/8" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-03-SS	3/16" tee fitting for tubing, SS	-	-	In stock	Enquiry
HM-LC764L-04-SS	3-way connector for 1/4" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-05-SS	3-way connector for 5/16" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-06-SS	3/8" tube tee fitting, SS	-	-	In stock	Enquiry
HM-LC764L-08-SS	3-way connector for 1/2" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-10-SS	3-way connector for 5/8" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-12-SS	3/4" tee fitting for tubing, SS	-	-	In stock	Enquiry
HM-LC764L-14-SS	3-way connector for 7/8" tubing, SS	-	-	In stock	Enquiry
HM-LC764L-16-SS	1" tee fitting for tubing, SS	-	-	In stock	Enquiry
HM-LC764L-20-SS	Tee fitting for pipe 1.1/4", SS	-	-	In stock	Enquiry
HM-LC764L-24-SS	3-way connector for pipe 1.1/2", SS	-	-	In stock	Enquiry
HM-LC764L-32-SS	3-way connector for 2" tubing, SS	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

LET-LOK® type tee fitting for connecting inch tubes, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.