What torque values are recommended for tightening the Reducing adapter with BSP, NPT and trapezoidal male threads on both sides, stainless steel, type RN?

Reducing adapter with BSP, NPT and trapezoidal male threads on both sides, stainless steel, type RN. recommended tightening torques Below are typical recommended torque ranges for stainless steel threaded fittings of the RN type. Use these as general guidance; always consult the specific manufacturerâs data and apply proper thread lubricant or anti-seize where specified. - BSP (British Standard Pipe, parallel or tapered): - G (parallel) threads with sealing washer/O-ring: 10â30 Nm for sizes up to 1/2"; 30â60 Nm for 3/4"â1"; 60â120 Nm for 1Â¼" and larger. - BSPT (tapered) threads (metal-to-metal/sealing tape): 20â40 Nm for 1/8"â1/2"; 40â80 Nm for 3/4"â1"; 80â140 Nm for 1Â¼" and larger. - NPT (National Pipe Tapered Thread): - 10â30 Nm for 1/8"â1/2" - 30â70 Nm for 3/4"â1" - 70â140 Nm for 1Â¼" and larger Note: NPT relies on thread deformation/sealant. avoid under- or over-tightening. - Trapezoidal male threads (mechanical/pressure-bearing connections): - Light-duty / small diameters: 20â60 Nm - Medium diameters: 60â120 Nm - Large diameters/heavy-duty: 120â300 Nm Exact torque depends on thread pitch, lead, and wrench flats. Important notes: - These ranges are indicative; confirm with RN type manufacturer for exact torque by size and thread form. - Use calibrated torque tools; tighten progressively and, for tapered threads, follow sealant manufacturer's cure/assembly guidance. - For stainless steel (AISI 316), use appropriate anti-seize or lubricant to prevent galling; adjust torque down if lubricant is used (typically reduce by ~20â30%). - For safety-critical or high-pressure installations, perform leak and pressure tests after assembly.

Reducing adapter with BSP, NPT and trapezoidal male threads on both sides, stainless steel, type RN

Q: Can the Reducing adapter with BSP, NPT and trapezoidal male threads on both sides, stainless steel, type RN withstand corrosive chemicals and seawater exposure?

Yes. The Reducing adapter with BSP, NPT and trapezoidal male threads on both sides, stainless steel, type RN is made of AISI 316 stainless steel and is specified for use with water, air, chemical substances and petrochemical products, which indicates suitability for many corrosive media. AISI 316 offers good corrosion resistance, including improved resistance to chlorides and seawater compared with 304 stainless steel, so the type RN is generally appropriate for seawater exposure and many corrosive chemicals. Caveats: actual resistance depends on the specific chemical, concentration, temperature and exposure time. Highly aggressive media (strong acids, halogenated solvents, hot chloride-rich environments, or highâpressure steam) may require more resistant alloys (e.g., duplex stainless steels, Hastelloy, titanium) or special linings. Also verify thread and seal material compatibility and applicable pressure/temperature ratings for your service. Recommendation: for critical or longâterm seawater or aggressive chemical service, confirm compatibility with the chemical resistance data for AISI 316 at your operating temperature and concentration, and consult the manufacturerâs data sheets for type RN regarding pressure, temperature limits and any recommended alternative materials.

All products, Threaded couplings and adapters/

Additional information

Material	SS – stainless steel
Standard length [m]	3, 50

Reducing adapter RN with BSP, NPT and trapezoidal male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all kinds of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RS-440038050112	Reducing adapter RN 3/8" male x 1/2" male, AISI 316	-	-	In stock	Enquiry
RS-440050075112	Reducing adapter RN 1/2" male x 3/4" male, AISI 316	-	-	In stock	Enquiry
RS-440050075312	Reducing adapter RN 3/4" male x 1/2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440075100112	Reducing adapter RN 3/4" male x 1" male, AISI 316	-	-	In stock	Enquiry
RS-440075100132	Reducing adapter RN 3/4" male x 1" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440075100312	Reducing adapter RN 1" male x 3/4" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440075100332	Reducing adapter RN 3/4" NPT male x 1" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440100100132	Reducing adapter RN 1" male x 1" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440100125112	Reducing adapter RN 1" male x 1.1/4" male, AISI 316	-	-	In stock	Enquiry
RS-440100150112	Reducing adapter RN 1" male x 1.1/2" male, AISI 316	-	-	In stock	Enquiry
RS-440100150132	Reducing adapter RN 1" male x 1.1/2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440100200112	Reducing adapter RN 1" male x 2" male, AISI 316	-	-	In stock	Enquiry
RS-440125150112	Reducing adapter RN 1.1/4" male x 1.1/2" male, AISI 316	-	-	In stock	Enquiry
RS-440125200112	Reducing adapter RN 1.1/4" male x 2" male, AISI 316	-	-	In stock	Enquiry
RS-440150150132	Reducing adapter RN 1.1/2" male x 1.1/2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440150200112	Reducing adapter RN 1.1/2" male x 2" male, AISI 316	-	-	In stock	Enquiry
RS-440150200132	Reducing adapter RN 1.1/2" male x 2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440150200312	Reducing adapter RN 2" male x 1.1/2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440200200132	Reducing adapter RN 2" male x 2" NPT male, AISI 316	-	-	In stock	Enquiry
RS-440200250112	Reducing adapter RN 2" male x 2.1/2" male, AISI 316	-	-	In stock	Enquiry
RS-440200300112	Reducing adapter RN 2" male x 3" male, AISI 316	-	-	In stock	Enquiry
RS-440300300132	Reducing adapter RN 3" male x 3" NPT male, AISI 316	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Reducing adapter RN with BSP, NPT and trapezoidal male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all kinds of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Material: AISI 316 steel.