Is the 90Â° JIC angle fitting with stainless steel UNF GZ, type W compatible with hydraulic systems using AISI 316 stainless steel and a 37Â° external cone seal?

Yes . the 90Â° JIC angle fitting with stainless steel UNF GZ, type W is compatible with hydraulic systems using AISI 316 stainless steel and a 37Â° external cone seal, provided a few conditions are met: - Material match: The fitting is specified as AISI 316 stainless steel, so it is metallurgically compatible with systems made from the same grade, avoiding galvanic corrosion and ensuring similar strength and corrosion resistance. - Seal geometry: The fitting uses a 37Â° external cone seal (JIC 37Â°), which matches the standard JIC 37Â° sealing principle. It will properly seal against a mating female port or seat designed for a 37Â° external cone. - Thread type: The fitting has an external UNF thread; ensure the mating port uses the compatible UNF/G-thread dimensions and tolerances for JIC connections to achieve proper engagement and sealing. - Pressure and application: Confirm the working pressure, temperature, fluid compatibility and mechanical loads of your hydraulic system fall within the rated limits of the fitting and of AISI 316 in your service conditions. - Assembly: Use correct torque, sealing practice and any required backup washers/pressure rings if specified by the manufacturer to avoid leaks or thread damage. If all the above align, the 90Â° JIC angle fitting with stainless steel UNF GZ, type W is suitable for use in such hydraulic systems.

Can the 90Â° JIC angle fitting with stainless steel UNF GZ, type W (AISI 316, 37Â° external cone seal) be used in corrosive hydraulic environments?

Yes - the 90Â° JIC angle fitting with stainless steel UNF GZ, type W (AISI 316, 37Â° external cone seal) is suitable for many corrosive hydraulic environments. AISI 316 stainless steel offers good corrosion resistance to chlorides and many chemicals, making it appropriate for seawater, brackish conditions, mild acids and alkalis, and general outdoor use. The JIC 37Â° external cone seal provides reliable metal-to-metal sealing under hydraulic pressure. However, suitability depends on specific factors: concentration and temperature of corrosive media, presence of galvanic coupling, required pressure rating, dynamic vs. static application, and compatibility of mating components and seals. For highly aggressive environments (strong acids, high chloride/high-temperature conditions), or where crevice corrosion/erosion is a concern, consider higher-alloy materials or protective coatings and confirm compatibility through testing or supplier datasheets.

Does the 90Â° JIC angle fitting with stainless steel UNF GZ, type W withstand high-pressure hydraulic applications with AISI 316?

Yes. the 90Â° JIC angle fitting with stainless steel UNF GZ, type W made of AISI 316 can be suitable for many highâpressure hydraulic applications, but suitability depends on specific pressure, media, temperature and threading/installation details. Explanation (key points): - Construction: AISI 316 stainless steel offers good strength, corrosion resistance and compatibility with hydraulic oils and many aggressive fluids, making it a common choice for highâpressure fittings. - Sealing type: The 90Â° JIC angle fitting JIC 37Â° with external UNF thread seals on the external 37Â° cone (metalâtoâmetal seat). This JIC cone design is proven for highâpressure hydraulic service when properly torqued and matched with the correct mating 37Â° female seat. - Pressure rating: JIC fittingsâ allowable working pressure varies with size, wall thickness and manufacturer standards. Typical JIC 37Â° fittings often handle pressures in the high hundreds to low thousands of bar/psi ranges for hydraulic sizes, but you must verify the specific rated working pressure from the manufacturer/test data for the exact 90Â° JIC angle fitting with stainless steel UNF GZ, type W Format and size used. - Threading: UNF external thread must match the mating component; proper thread engagement and correct thread seal practice are essential to avoid leakage or strength loss. - Temperature and media: AISI 316 retains strength across a broad temperature range, but elevated temperatures reduce allowable pressure. Verify compatibility with fluid, temperature, and any cyclic/impact loads. - Installation and inspection: Use correct torque, compatible mating seats, and appropriate assembly procedures. Inspect for galling (stainless on stainless), and consider anti-seize or lubrication if recommended. - Certification and testing: For critical/highâpressure systems, require manufacturer pressure ratings, material certificates (EN/ASTM), and, if needed, hydrostatic test/certification. Consider using fittings rated to the systemâs maximum operating pressure with suitable safety margin. Conclusion: The 90Â° JIC angle fitting with stainless steel UNF GZ, type W Format and AISI 316 construction is appropriate for many highâpressure hydraulic applications when the specific fitting size/rating, mating components, pressure, temperature and installation practices meet the required specifications. Always confirm the manufacturerâs pressure rating and certifications for your exact fitting and application before use.

90° JIC angle fitting with stainless steel UNF GZ, type W

Additional information

Material	SS – stainless steel

90° angle fitting JIC 37° with external UNF thread (seal on external 37° cone). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HJ-W-07-SS	90° GZ JIC 7/16"-20 fitting, AISI 316	-	450	In stock	Enquiry
HJ-W-08-SS	90° GZ JIC 1/2"-20 fitting, AISI 316	-	450	In stock	Enquiry
HJ-W-09-SS	90° GZ JIC 9/16"-18 fitting, AISI 316	-	350	In stock	Enquiry
HJ-W-12-SS	90° GZ JIC 3/4"-16 fitting, AISI 316	-	350	In stock	Enquiry
HJ-W-14-SS	90° GZ JIC 7/8"-14 fitting, AISI 316	-	350	In stock	Enquiry
HJ-W-17-SS	90° GZ JIC 1.1/16"-12 fitting, AISI 316	-	350	In stock	Enquiry
HJ-W-21-SS	90° GZ JIC fitting 1.5/16"-12, AISI 316	-	290	In stock	Enquiry
HJ-W-26-SS	90° GZ JIC fitting 1.5/8"-12, AISI 316	-	240	In stock	Enquiry
HJ-W-30-SS	90° GZ JIC fitting 1.7/8"-12, AISI 316	-	240	In stock	Enquiry