Can Quick-connect air connector MINI DN5, with hose end, nickel-plated brass, 16 bar be used for non-flammable gases like nitrogen and compressed air?

Yes. Quick-connect air connector MINI DN5, with hose end, nickel-plated brass, 16 bar is suitable for non-flammable gases such as nitrogen and compressed air. The product description explicitly lists use for air, nitrogen and other non-flammable gases. Its working pressure of 16 bar and operating temperature range â10Â°C to +90Â°C are appropriate for typical applications, and the nickel-plated brass construction is compatible with these gases. Ensure compatibility with your specific system (pressure spikes, seals, hose material) and any applicable safety standards before installation.

Does Quick-connect air connector MINI DN5, with hose end, nickel-plated brass, 16 bar require a specific hose inner diameter?

Quick-connect air connector MINI DN5, with hose end, nickel-plated brass, 16 bar does not specify a required hose inner diameter in the provided Eurostandard description. However, since it is a MINI DN5 (DN5 denotes nominal diameter ~5 mm), you should use a hose with an inner diameter close to 5 mm to ensure proper fit and sealing on the hose end tailpiece. Using a hose with a significantly smaller ID may not fit or seal; a substantially larger ID may require an adaptor or clamp and can reduce sealing reliability and performance. Recommended practical guidance: - Preferred: hose with ID â 5 mm (to match DN5). - Acceptable: hoses within Â±0.5 mm of 5 mm if properly clamped. - Always verify physical fit on the actual connector tailpiece and use appropriate hose clamps or ferrules. - Ensure hose material and pressure rating match the working pressure (16 bar) and operating temperature range (-10Â°C to +90Â°C). If you need exact dimensions for the hose barb (tail) profile to select a precise hose ID or ferrule, request the manufacturerâs technical drawing or contact Eurostandard for confirmation.

Quick-connect air connector MINI DN5, with hose end, nickel-plated brass, 16 bar

All products, General-purpose low-pressure quick couplings/

Additional information

Material	B – brass (bronze)
Standard length [m]	2

Eurostandard MINI DN 5 quick coupling plug, without valve, with hose end, widely used in the industry (for air, nitrogen, and other non-flammable gases), where small dimensions and high flow efficiency with low pressure drop are required. Interchangeable with RECTUS 21 and EURO DN 5 quick couplings from other manufacturers. Working pressure: 16 bar. Operating temperature: from -10°C to +90°C. Material: nickel-plated brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TP-ES5-WK-04	MINI DN5 quick coupling plug, for 4 mm hose, nickel-plated brass	4	16	In stock	0 zł		Enquiry
TP-ES5-WK-06	MINI DN5 quick coupling plug, for 6 mm hose, nickel-plated brass	6	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Eurostandard MINI DN 5 quick coupling plug, without valve, with hose end, widely used in the industry (for air, nitrogen, and other non-flammable gases), where small dimensions and high flow efficiency with low pressure drop are required. Interchangeable with RECTUS 21 and EURO DN 5 quick couplings from other manufacturers. Working pressure: 16 bar. Operating temperature: from -10°C to +90°C. Material: nickel-plated brass.