Is the Quick connector DN10 without valve, with hose end, hardened steel, series 27KA suitable for continuous use at 35 bar and temperatures between -20Â°C and +100Â°C?

Yes. The Quick connector DN10 without valve, with hose end, hardened steel, series 27KA is specified for a working pressure of 35 bar and an operating temperature range of -20Â°C to +100Â°C. Based on the provided description (nickel-plated hardened steel, standard EURO DN10 profile, hose end, series 27KA), it is suitable for continuous use at 35 bar within the stated temperature range, assuming normal application conditions and correct installation. Note: Verify compatibility with your fluid type, dynamic loads, safety factors, and any applicable industry standards or regulations before long-term service.

Can Quick connector DN10 without valve, with hose end, hardened steel, series 27KA be used with hydraulic fluids at 35 bar and temperatures from -20Â°C to +100Â°C?

Yes. Quick connector DN10 without valve, with hose end, hardened steel, series 27KA can be used with hydraulic fluids at 35 bar and temperatures from -20Â°C to +100Â°C, since its specified working pressure is 35 bar and the operating temperature range is â20Â°C to +100Â°C. Ensure fluid compatibility with nickel-plated hardened steel and verify seals/materials for specific hydraulic fluid chemistry before long-term use.

Can Quick connector DN10 without valve, with hose end, hardened steel, series 27KA withstand pressure spikes above 35 bar?

Quick connector DN10 without valve, with hose end, hardened steel, series 27KA. based on the provided specification (working pressure 35 bar; material: nickel-plated hardened steel; operating temperature -20Â°C to +100Â°C) is rated for continuous operation up to 35 bar. Occasional pressure spikes above the stated working pressure are not guaranteed safe by the data given. Hardened steel construction and nickel plating improve strength and corrosion resistance, so the coupling may tolerate short transients somewhat above 35 bar, but there is no specified maximum spike or safety factor provided. Without explicit manufacturer information on burst pressure, impulse testing, or permitted transient overpressure, you should not assume it can withstand pressure spikes above 35 bar. For safe use, either avoid spikes above 35 bar or consult the manufacturer/datasheet for burst pressure and impulse ratings or choose a coupling specified for higher peak pressures.

Plug quick coupling DN10 without valve, with fitting for hose, steel hardened, series 27KA

All products, General-purpose low-pressure quick couplings/

Additional information

Material	CS – steel (cast iron)

Plug quick coupling without valve, o standard profile EURO DN10, with fitting for hose, series 27KA. Working pressure: 35 bar. Material: steel hardened nickel-plated. Operating temperature: from -20°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RE-27SFTF06SXN	Quick coupling plug 27SF DN10, for 6 mm hose, nickel-plated steel	6	35	In stock	Enquiry
RE-27SFTF08SXN	Quick coupling plug 27SF DN10, for 8 mm hose, nickel-plated steel	8	35	In stock	Enquiry
RE-27SFTF09SXN	Quick coupling plug 27SF DN10, for 9 mm hose, nickel-plated steel	8	35	In stock	Enquiry
RE-27SFTF10SXN	Quick coupling plug 27SF DN10, for 10 mm hose, nickel-plated steel	10	35	In stock	Enquiry
RE-27SFTF13SXN	Quick coupling plug 27SF DN10, for 13 mm hose, nickel-plated steel	12	35	In stock	Enquiry
RE-27SFTF16SXN	Quick coupling plug 27SF DN10, for 16 mm hose, nickel-plated steel	16	35	In stock	Enquiry
RE-27SFTF19SXN	Quick coupling plug 27SF DN10, for 19 mm hose, nickel-plated steel	20	35	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug quick coupling without valve, o standard profile EURO DN10, with fitting for hose, series 27KA. Working pressure: 35 bar. Material: steel hardened nickel-plated. Operating temperature: from -20°C to +100°C.