Can the CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel be safely coupled under 400 bar static plug-side pressure without fluid loss?

Yes. The CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel can be safely coupled under a static plugâside pressure of 400 bar without fluid loss, provided the following conditions are met: the coupling is the flatâface nonâdrip type with the static pressure eliminator fitted, mating is performed from the socket side at 0 bar as specified, and the correct sealing material (NBR for -25Â°C to +100Â°C or an alternative suited to the fluid/temperature) is selected. The product is rated for working pressures up to 500 bar and explicitly states a maximum static pressure during coupling of 0 bar on the socket side and 400 bar on the plug side, enabling oneâhand operation without spillage when used per manufacturer guidance and within stated limits.

Can the CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel be connected one-handed under 400 bar plug-side static pressure without leakage?

Yes. The CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel can be connected one-handed under plug-side static pressure up to 400 bar without leakage when used as specified. It is a non-drip flat-face design with a static pressure eliminator, rated for working pressures up to 500 bar and specified maximum static pressure during coupling of 400 bar on the plug side (0 bar on the socket side). Ensure correct sealing material (NBR for -25Â°C to +100Â°C) and proper installation/maintenance to achieve leak-free coupling.

Is the CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel safe to mate under 400 bar plug-side static pressure?

Yes. the CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel is safe to mate under 400 bar plug-side static pressure, provided the following conditions are met: - You are using the version fitted with the static pressure eliminator. - The socket side has 0 bar static pressure at the moment of coupling (per the stated maximum static pressure limits). - The coupling is used within its specified working pressure (up to 500 bar) and temperature limits for the sealing material (NBR: â25 Â°C to +100 Â°C), and the correct sealing material is selected for your hydraulic fluid and temperature. - Installation, maintenance and operation follow the manufacturerâs instructions and ISO 16028 compatibility requirements (interchangeable with ISO-F couplings). If any of these conditions are not met (e.g., no eliminator, socket-side pressure >0 bar, incompatible sealing material or extreme temperature/fluids), do not mate under 400 bar plug-side static pressure.

CEJN X64 leakless hydraulic quick coupler, plug with eliminator with GW of carbon steel

All products, Hydraulic quick couplings/

Additional information

Material	CS – steel (cast iron)

Non-drip quick coupling plug type “flat-face” designed mainly for construction machinery, where large pressure spikes occur. Version with static pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028. Application: hydraulic power (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure during coupling of quick couplings with plug with pressure eliminator: from the socket side 0 bar, from the plug side 400 bar. Flow rate is given at Δp = 3 bar [l/min].

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-H-100646203	CEJN X64 1" plug, 1" BSP male thread, NBR seal, with eliminator	-	350	In stock	Enquiry
CJ-H-100646204	CEJN X64 1" plug, 1.1/4" BSP thread, NBR seal, with eliminator	-	350	In stock	Enquiry
CJ-H-102646202	CEJN X64 1/4" plug, 1/4" BSP male thread, NBR seal, with eliminator	-	500	In stock	Enquiry
CJ-H-103646204	CEJN X64 3/8" plug, 3/8" BSP female thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-103646205	CEJN X64 3/8" plug, 1/2" BSP female thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-105646205	CEJN X64 1/2" plug, 1/2" BSP female thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-105646207	CEJN X64 1/2" plug, 3/4" BSP female thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-106646201	CEJN X65 5/8" plug, 3/4" BSP male thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-107646201	CEJN X64 3/4" plug, 3/4" BSP male thread, NBR seal, with eliminator	-	400	In stock	Enquiry
CJ-H-107646203	CEJN X64 3/4" plug, 1" BSP male thread, NBR seal, with eliminator	-	400	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Non-drip quick coupling plug type “flat-face” designed mainly for construction machinery, where large pressure spikes occur. Version with static pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028. Application: hydraulic power (hydraulic oil), industrial. Working pressure: up to 500 bar. Material: steel with zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure during coupling of quick couplings with plug with pressure eliminator: from the socket side 0 bar, from the plug side 400 bar. Flow rate is given at Δp = 3 bar [l/min].