Is the ORFS adaptor with stainless steel GZ BSP, type GE-B (AISI 316) compatible with standard ORFS 60Â° cone seals and BSP threads?

Yes. The ORFS adaptor with stainless steel GZ BSP, type GE-B (AISI 316) is designed as an ORFS adapter with external BSP thread and 60Â° cone sealing, so it is compatible with standard ORFS 60Â° cone seals. It also uses BSP external threads (GZ BSP), so it will mate with corresponding BSP female threaded ports sized to the adaptor. Because the body material is AISI 316 stainless steel, it offers corrosion resistance suitable for typical hydraulic and fluid applications. Ensure thread size and pressure ratings match the mating component and that proper sealing surfaces and gasket/seat condition meet manufacturer specifications before installation.

Does the ORFS adaptor with stainless steel GZ BSP, type GE-B resist corrosion in seawater and marine environments?

The ORFS adaptor with stainless steel GZ BSP, type GE-B, made of AISI 316 stainless steel, offers good general corrosion resistance and is commonly used in marine-related applications. AISI 316 contains molybdenum, which improves resistance to chloride-induced corrosion compared with 304 grade. However, in aggressive seawater and splashâzone marine environments, 316 stainless steel can still suffer pitting, crevice corrosion and stress corrosion cracking over time, especially in stagnant or oxygenâpoor conditions, or where fouling concentrates chlorides. For prolonged or critical seawater service, higherâperformance alloys (e.g., superaustenitic or duplex stainless steels, or nickelâbased alloys) or protective measures (coatings, cathodic protection, regular maintenance) are recommended. In short: GE-B (AISI 316) is suitable for many marine uses but may not be ideal for longâterm exposure in harsh seawater without additional protection.

What torque should be used when installing the ORFS adaptor with stainless steel GZ BSP, type GE-B (AISI 316)?

For installing the ORFS adaptor with stainless steel GZ BSP, type GE-B (AISI 316), use the following assembly torque guidance: - For thread sizes 1/8"â1/4" BSP: 10â15 Nm - For thread sizes 3/8"â1/2" BSP: 20â30 Nm - For thread sizes 3/4" BSP: 40â50 Nm - For thread sizes 1" BSP and above: 60â80 Nm Notes: - These values are typical recommended torques for stainless steel BSP threads with a 60Â° cone ORFS sealing; actual required torque can vary with lubrication, thread condition, and fitting tolerances. - Apply clean threads and use a suitable lubricant (light machine oil or specified anti-seize for stainless steel) to achieve consistent clamping and avoid galling. - Tighten progressively and check for correct seal; do not exceed material yield strength. - If precise values are required for critical applications, consult the manufacturerâs torque chart for the ORFS adaptor with stainless steel GZ BSP, type GE-B or perform a qualified assembly test.

ORFS adaptor with stainless steel GZ BSP, type GE-B

Additional information

Material	SS – stainless steel
Standard length [m]	10, 2, 50

ORFS adapter with external BSP thread (60° cone sealing), type GE-B. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HO-GE-09-B-02-SS	Adaptor GZ BSP 1/8" - GZ ORFS 9/16"-18, AISI 316	-	400	In stock	Enquiry
HO-GE-09-B-04-SS	Adaptor GZ BSP 1/4" - GZ ORFS 9/16"-18, AISI 316	-	400	In stock	Enquiry
HO-GE-09-B-06-SS	Adaptor GZ BSP 3/8" - GZ ORFS 9/16"-18, AISI 316	-	400	In stock	Enquiry
HO-GE-11-B-04-SS	Adaptor GZ BSP 1/4" - GZ ORFS 11/16"-16, AISI 316	-	400	In stock	Enquiry
HO-GE-11-B-06-SS	Adaptor GZ BSP 3/8" - GZ ORFS 11/16"-16, AISI 316	-	400	In stock	Enquiry
HO-GE-11-B-08-SS	Adaptor GZ BSP 1/2" - GZ ORFS 11/16"-16, AISI 316	-	350	In stock	Enquiry
HO-GE-13-B-04-SS	Adaptor GZ BSP 1/4" - GZ ORFS 13/16"-16, AISI 316	-	400	In stock	Enquiry
HO-GE-13-B-06-SS	Adaptor GZ BSP 3/8" - GZ ORFS 13/16"-16, AISI 316	-	400	In stock	Enquiry
HO-GE-13-B-08-SS	Adaptor GZ BSP 1/2" - GZ ORFS 13/16"-16, AISI 316	-	350	In stock	Enquiry
HO-GE-13-B-12-SS	Adaptor GZ BSP 3/4" - GZ ORFS 13/16"-16, AISI 316	-	315	In stock	Enquiry
HO-GE-16-B-06-SS	Adaptor GZ BSP 3/8" - GZ ORFS 1"-14, AISI 316	-	400	In stock	Enquiry
HO-GE-16-B-08-SS	Adaptor GZ BSP 1/2" - GZ ORFS 1"-14, AISI 316	-	350	In stock	Enquiry
HO-GE-16-B-10-SS	Adaptor GZ BSP 5/8" - GZ ORFS 1"-14, AISI 316	-	350	In stock	Enquiry
HO-GE-16-B-12-SS	Adaptor GZ BSP 3/4" - GZ ORFS 1"-14, AISI 316	-	315	In stock	Enquiry
HO-GE-19-B-08-SS	Adaptor GZ BSP 1/2" - GZ ORFS 1.3/16"-12, AISI 316	-	350	In stock	Enquiry
HO-GE-19-B-12-SS	Adaptor GZ BSP 3/4" - GZ ORFS 1.3/16"-12, AISI 316	-	315	In stock	Enquiry
HO-GE-19-B-16-SS	Adaptor GZ BSP 1" - GZ ORFS 1.3/16"-12, AISI 316	-	250	In stock	Enquiry
HO-GE-23-B-12-SS	Adaptor GZ BSP 3/4" - GZ ORFS 1.7/16"-12, AISI 316	-	315	In stock	Enquiry
HO-GE-23-B-16-SS	Adaptor GZ BSP 1" - GZ ORFS 1.7/16"-12, AISI 316	-	250	In stock	Enquiry
HO-GE-23-B-20-SS	Adaptor GZ BSP 1.1/4" - GZ ORFS 1.7/16"-12, AISI 316	-	200	In stock	Enquiry
HO-GE-27-B-20-SS	Adaptor GZ BSP 1.1/4" - GZ ORFS 1.11/16"-12, AISI 316	-	200	In stock	Enquiry
HO-GE-32-B-24-SS	Adaptor GZ BSP 1.1/2" - GZ ORFS 2"-12, AISI 316	-	160	In stock	Enquiry