Can Adaptor 90Â° compact with GW BSP, stainless steel, type A115C withstand high-pressure applications in corrosive environments?

Yes. Adaptor 90Â° compact with GW BSP, stainless steel, type A115C is made from AISI 316L, a corrosionâresistant stainless steel commonly used in aggressive environments (chlorides, seawater, many chemicals). Its design as a 90Â° highâpressure adapter with internal BSP threads and 60Â° cone sealing indicates it is intended for highâpressure service when correctly installed and tightened to specified torque. However, actual suitability depends on specific operating conditions: maximum pressure rating, media chemistry, temperature, mechanical loads and compatibility with mating components and seals. For critical or extreme corrosive or highâpressure applications, verify the adapterâs certified pressure rating, consult manufacturer datasheets and perform compatibility checks (corrosion charts, partial pressures, temperatures) or contact the manufacturer/engineer for final approval.

Does Adaptor 90Â° compact with GW BSP, stainless steel, type A115C require specific torque values for BSP 60Â° cone connections?

Adaptor 90Â° compact with GW BSP, stainless steel, type A115C does require attention to torque for BSP 60Â° cone connections. Although the product description (90Â° high-pressure adapter type A115C compact with internal BSP threads (60Â° cone sealing). Material: AISI 316L steel) does not list explicit torque values, BSP 60Â° cone fittings rely on proper tightening to achieve metal-to-metal cone sealing and to avoid leaks or damage. Recommended approach: - Use manufacturerâs torque specifications if available for the specific size of BSP female/male threads. If the manufacturer (supplier of Adaptor 90Â° compact with GW BSP, stainless steel, type A115C) does not provide values, follow standard torque ranges for BSP 60Â° cone fittings by thread size (consult tables from reputable hydraulic fitting standards or DIN/ISO references). - Torque should be applied with a calibrated torque wrench and increased gradually while checking seal integrity. - Avoid over-torquing to prevent deformation of the 60Â° cone or threads (risking leaks or galling in AISI 316L stainless steel). - Use appropriate thread lubrication or anti-seize recommended for stainless steel to reduce galling and ensure repeatable torque. - After initial assembly, perform pressure test at working pressure to verify seal; re-check torque after pressure cycling if specified. If you need exact torque numbers, provide the BSP thread size (e.g., 1/4", 3/8", 1/2" BSP) and I can supply typical torque ranges from standard reference tables.

Adaptor 90° compact with GW BSP, stainless steel, type A115C

Q: Is the Adaptor 90Â° compact with GW BSP, stainless steel, type A115C compatible with hydraulic systems using 60Â° cone sealing and internal BSP threads?

Yes. The Adaptor 90Â° compact with GW BSP, stainless steel, type A115C is compatible with hydraulic systems that use a 60Â° cone sealing and internal BSP threads. The product description explicitly states it is a 90Â° high-pressure adapter type A115C compact with internal BSP threads (60Â° cone sealing) and is made of AISI 316L stainless steel, so it matches both the sealing geometry (60Â° cone) and the thread form (BSP internal). Ensure thread size and pressure rating match your system specifications before installation.

All products, High-pressure adapters/

Adaptor 90° compact with GW BSP, stainless steel, type A115C

Additional information

Material	SS – stainless steel

90° high-pressure adapter type A115C compact with internal BSP threads (60° cone sealing). Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A115C-02-SS	90° Adapter GW BSP 1/8" / GW BSP 1/8", AISI 316	-	400	In stock	Enquiry
TI-A115C-04-SS	90° Adapter GW BSP 1/4" / GW BSP 1/4", AISI 316	-	400	In stock	Enquiry
TI-A115C-06-SS	Adapter 90° GW BSP 3/8" / GW BSP 3/8", AISI 316	-	400	In stock	Enquiry
TI-A115C-08-SS	90° Adapter GW BSP 1/2" / GW BSP 1/2", AISI 316	-	350	In stock	Enquiry
TI-A115C-12-SS	90° Adapter GW BSP 3/4" / GW BSP 3/4", AISI 316	-	315	In stock	Enquiry
TI-A115C-16-SS	90° Adapter GW BSP 1" / GW BSP 1", AISI 316	-	250	In stock	Enquiry
TI-A115C-20-SS	90° Adapter GW BSP 1.1/4" / GW BSP 1.1/4", AISI 316	-	200	In stock	Enquiry
TI-A115C-24-SS	90° Adapter GW BSP 1.1/2" / GW BSP 1.1/2", AISI 316	-	160	In stock	Enquiry