Is the KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF suitable for unloading cement wagons and operating at up to 8 bar water pressure?

Yes. The KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF is suitable for unloading cement wagons and for use with water at pressures up to 8 bar. The product description explicitly lists unloading cement wagons among its wide applications, and its working pressure rating is up to 8 bar for water. Construction materials and seals (aluminum body, EPDM sealing) and an operating temperature range of â25Â°C to +60Â°C support typical handling of cement and water in such conditions. Note: ensure compatibility with your specific system flange dimensions and any local safety or operational requirements before installation.

Can the KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF be used in irrigation systems and agricultural farms at temperatures down to -25Â°C?

Yes. The KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF is specified for operating temperatures from â25Â°C to +60Â°C and lists agricultural farms and irrigation systems among its intended applications. With EPDM sealing and aluminum construction, it is rated for those conditions (working pressure up to 8 bar for water), so it can be used in irrigation systems and agricultural farms at temperatures down to â25Â°C.

Can the KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF be used for tank truck loading and unloading operations?

Yes. the KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF can be used for tank truck loading and unloading, with some caveats. Why it is suitable: - The product description explicitly lists tank trucks among its wide applications, indicating intended use in such operations. - Made of aluminum with EPDM sealing, it is suitable for many common liquids. - Working pressure up to 8 bar (water) covers typical transfer pressures used in tank truck loading/unloading. Caveats and checks before use: - Verify the fluid compatibility with aluminum and EPDM (aggressive chemicals, strong solvents or certain fuels may require different materials). - Confirm the required working pressure for your specific operation does not exceed 8 bar for liquids (and note air rating is only up to 3 bar). - Ensure temperature range (â25Â°C to +60Â°C) matches your process conditions. - Confirm flange and connector dimensions/standards match the tank truck and system fittings. - Check applicable safety, industry and transport regulations for your cargo (e.g., petroleum products, hazardous chemicals may demand certified equipment). Summary: The KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF is appropriate for tank truck loading/unloading when fluid compatibility, pressure, temperature and regulatory requirements are met.

KLAUDIA lever connector socket with PN10 flange, aluminum, type KMF

All products, Lever couplings/

Additional information

Material	AL – aluminum

Lever connector socket KLAUDIA finished with a PN10 flange with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
KL-KMF-051-050	KMF socket 51 mm with flange DN 50 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-051-065	KMF socket 51 mm with flange DN 65 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-051-080	KMF socket 51 mm with flange DN 80 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-070-050	KMF socket 70 mm with flange DN 50 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-070-065	KMF socket 70 mm with flange DN 65 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-070-080	KMF socket 70 mm with flange DN 80 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-089-080	KMF socket 89 mm with flange DN 80 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-089-100	KMF socket 89 mm with flange DN 100 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-108-080	KMF socket 108 mm with flange DN 80 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-108-100	KMF socket 108 mm with flange DN 100 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-133-100	KMF socket 133 mm with flange DN 100 PN10, aluminum	-	8	In stock	Enquiry
KL-KMF-133-150	KMF socket 133 mm with flange DN 150 PN10, aluminum	-	8	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lever connector socket KLAUDIA finished with a PN10 flange with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.