Can Low-pressure unreinforced PVC hose, type CP be used for food applications and what migration tests are required to comply with EU Regulation 10/2011 and FDA 21?

Yes . Low-pressure unreinforced PVC hose, type CP can be used for food applications, but only after the required migration testing is performed for the intended contact conditions. The hose material is made of transparent PVC that is free from phthalates, silicone and cadmium and is stated to comply with REACH, RoHS and WEEE; the supplier also indicates the base material complies with EU Regulation 10/2011 and FDA 21 requirements. To place the hose into food contact service you must perform specific migration tests using appropriate food simulants and test conditions that reflect the type of food, contact time and temperature per EU 10/2011 (and its amendments) and FDA guidance: - For EU 10/2011: carry out overall migration and specific migration tests using the prescribed simulants (e.g., simulants A, B, C, D1, D2 depending on aqueous, acidic, alcoholic, oily foods) and the time/temperature conditions corresponding to intended use. Also verify that any identified non-listed substances comply with SMLs and that NIAS are assessed when relevant. - For FDA 21 CFR: perform extractive/migration testing consistent with FDA guidance for food-contact polymers (use appropriate simulants and conditions), and demonstrate that any additives or residues are acceptable under FDA rules or have suitable GRAS/status. Document test reports from accredited labs showing compliance with the relevant limits. Note operational limits (temperature range and working pressure) and that final approval depends on matching test conditions to real use (food type, temperature, contact duration).

Is Low-pressure unreinforced PVC hose, type CP suitable for use with light chemicals like diluted acids and bases?

Yes. Low-pressure unreinforced PVC hose, type CP is suitable for use with light chemicals such as diluted acids and bases. It is specifically designed for non-pressurized or very low-pressure transmission of light chemicals and laboratory applications. The PVC material is transparent, free from phthalates, silicone, and cadmium, and meets REACH, RoHS and WEEE requirements. Note operating temperature range (-20Â°C to +55Â°C, temporarily to +65Â°C) and that working pressure is indicative with a 5:1 safety factor; chemical compatibility and application-specific conditions (concentration, temperature, exposure time, and pressure) should be verified for your exact use.

Can Low-pressure unreinforced PVC hose, type CP be used as protection for electrical conduits in outdoor environments?

Yes. with qualifications. Low-pressure unreinforced PVC hose, type CP can be used as mechanical protection for electrical conduits outdoors, provided the application respects its material and performance limits: - Intended use: the hose is described for protection of pipes and conduits, so mechanically it is suitable as a protective covering. - Environmental limits: operating temperature â20Â°C to +55Â°C (temporarily up to +65Â°C). Prolonged exposure outside this range can degrade flexibility and strength. - UV/weathering: description does not state UV or sunlight resistance; prolonged outdoor exposure (UV, ozone, heavy rain, freezeâthaw) may cause embrittlement or loss of properties. For long-term external use, UV-stabilized or specifically outdoor-rated materials are preferable. - Mechanical and fire performance: material is self-extinguishing per UL94-V2/HB (3 mm) but that is not an electrical fire-rating; it offers some flame retardancy but not necessarily compliance with electrical wiring enclosure standards. - Electrical safety: PVC is nonâconductive, but the hose is not a certified electrical conduit enclosure. Do not rely on it for grounding, mechanical protection against impact beyond its intended light-duty use, or as a substitute for conduit types required by local electrical codes. - Chemical/weather resistance: compatible with many liquids and light chemicals; free of phthalates/silicone/cadmium and REACH/RoHS/WEEE compliant. - Pressure/structure: unreinforced and low-pressure. not rigid; may collapse or deform under load or long unsupported runs. Recommendation: You may use Low-pressure unreinforced PVC hose, type CP as an external protective oversleeve for conduits in light-duty outdoor applications where UV exposure is limited and mechanical/flammability/electrical code requirements are not critical. For permanent outdoor installations, exposed runs, or where compliance with electrical regulations is required, choose a UV-stabilized, outdoor-rated conduit or a conduit product certified for electrical installations per local codes.

Low-pressure unreinforced PVC hose, type CP

All products, General purpose hoses/

Additional information

Material	PVC – polyvinyl chloride
Maximum operating temperature [°C]	55
Minimum operating temperature [°C]	-20
Vacuum resistance	no
Standard length [m]	0.3, 2, 30

Universal, highly flexible, unreinforced hose produced in the United Kingdom. Designed for non-pressurized (or very low-pressure) transmission of air, water, and liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), in laboratory applications, for level indicators, and as protection for pipes, conduits, hoses, etc. The hose material is free from phthalates, silicone, and cadmium, compliant with REACH, RoHS, and WEEE regulations. According to EU regulations, use for food products is possible after conducting the required migration tests using appropriate model fluids simulating the specific type of food (the material used for hose production complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing according to UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is an indicative value of the recommended working pressure with a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +55°C (temporarily up to +65°C, working pressure dependent on temperature).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CX-CP-03X06	PVC hose type CP 3x6 mm	3	3.6	In stock	Enquiry
CX-CP-04X06	PVC hose type CP 4x6 mm	4	2.31	In stock	Enquiry
CX-CP-05X08	PVC hose type CP 5x8 mm	5	2.63	In stock	Enquiry
CX-CP-05X11	PVC hose type CP 5x11 mm	5	3.95	In stock	Enquiry
CX-CP-06X09	PVC hose type CP 6x9 mm	6	2.31	In stock	Enquiry
CX-CP-08X11	PVC hose type CP 8x11 mm	8	1.85	In stock	Enquiry
CX-CP-08X14	PVC hose type CP 8x14 mm	8	3.05	In stock	Enquiry
CX-CP-09X12	PVC hose type CP 9x12 mm	10	1.68	In stock	Enquiry
CX-CP-10X13	PVC hose type CP 10x13 mm	10	1.54	In stock	Enquiry
CX-CP-10X16	PVC hose type CP 10x16 mm	10	2.63	In stock	Enquiry
CX-CP-12X15	PVC hose type CP 12x15 mm	12	1.32	In stock	Enquiry
CX-CP-12X18	PVC hose type CP 12x18 mm	12	2.31	In stock	Enquiry
CX-CP-13X19	PVC hose type CP 13x19 mm	12	2.17	In stock	Enquiry
CX-CP-16X19	PVC hose type CP 16x19 mm	16	1.02	In stock	Enquiry
CX-CP-16X22	PVC hose type CP 16x22 mm	16	1.85	In stock	Enquiry
CX-CP-19X25	PVC hose type CP 19x25 mm	20	1.61	In stock	Enquiry
CX-CP-22X28	PVC hose type CP 22x28 mm	22	1.42	In stock	Enquiry
CX-CP-25X31	PVC hose type CP 25x31 mm	25	1.27	In stock	Enquiry
CX-CP-32X38	PVC hose type CP 32x38 mm	32	1.02	In stock	Enquiry
CX-CP-38X44	PVC hose type CP 38x44 mm	38	0.87	In stock	Enquiry
CX-CP-45X51	PVC hose type CP 45x51 mm	45	0.75	In stock	Enquiry
CX-CP-45X54	PVC hose type CP 45x54 mm	45	1.08	In stock	Enquiry
CX-CP-50X59	PVC hose type CP 50x59 mm	50	0.98	In stock	Enquiry
CX-CP-50X62	PVC hose type CP 50x62 mm	50	1.27	In stock	Enquiry
CX-CP-60X72	PVC hose type CP 60x72 mm	60	1.08	In stock	Enquiry
CX-CP-76X88	PVC hose type CP 76x88 mm	75	0.87	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Universal, highly flexible, unreinforced hose produced in the United Kingdom. Designed for non-pressurized (or very low-pressure) transmission of air, water, and liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), in laboratory applications, for level indicators, and as protection for pipes, conduits, hoses, etc. The hose material is free from phthalates, silicone, and cadmium, compliant with REACH, RoHS, and WEEE regulations. According to EU regulations, use for food products is possible after conducting the required migration tests using appropriate model fluids simulating the specific type of food (the material used for hose production complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing according to UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is an indicative value of the recommended working pressure with a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +55°C (temporarily up to +65°C, working pressure dependent on temperature).

Additional information

Material	PVC – polyvinyl chloride
Maximum operating temperature [°C]	55
Minimum operating temperature [°C]	-20
Vacuum resistance	no
Standard length [m]	0.3, 2, 30