Can the PUSH-ON JIC self-clamping end with GW UNF, type YJW110 be used with hoses other than the specified PUSH-ON hose or secured with clamps/bands?

No. The PUSH-ON JIC self-clamping end with GW UNF, type YJW110 is specifically designed for the PUSH-ON self-clamping hose and must be mounted without clamps or bands. Its groove profile is tailored to the material, dimensions and braid structure of that hose to achieve proper self-clamping. Using other hoses or adding external clamps/bands can prevent correct sealing, damage the hose and compromise performance and safety. Follow the hoseâs working pressure and temperature limits (-40Â°C to +80Â°C) and use only the specified PUSH-ON hose with this fitting.

Can the PUSH-ON JIC self-clamping end with GW UNF, type YJW110 damage hoses if used with non-PUSH-ON hoses or additional clamps?

Can the PUSH-ON JIC self-clamping end with GW UNF, type YJW110 damage hoses if used with non-PUSH-ON hoses or additional clamps? Yes. The PUSH-ON JIC self-clamping end with GW UNF, type YJW110 is engineered specifically for PUSH-ON hoses and features a special groove profile that relies on the hoseâs materials, dimensions and braid structure to form a secure seal without clamps. Using it with non-PUSH-ON hoses or applying additional bands/clamps can deform or cut into the hose, compromise the braid, and cause leaks or premature failure. The fitting must only be used with the intended PUSH-ON hoses and without external clamps to avoid damage. Operating temperature: -40Â°C to +80Â°C; working pressure per PUSH-ON hose specifications.

Is the PUSH-ON JIC self-clamping end with GW UNF, type YJW110 compatible with hoses of different materials or sizes?

The PUSH-ON JIC self-clamping end with GW UNF, type YJW110 is specifically designed for one type of PUSH-ON self-clamping hose. Its groove profile is matched to the material, dimensions and braid structure of that PUSH-ON hose, allowing a secure connection without additional clamps or bands. Therefore: - It is not recommended for use with hoses of different materials, constructions or sizes. using other hoses can prevent proper clamping and may damage the hose. - It must not be clamped with external bands or clamps; doing so can harm the hose and compromise the connection. - Operating temperature range is â40Â°C to +80Â°C and working pressure must conform to the specifications of the compatible PUSH-ON hose. - Available materials: galvanized carbon steel, brass, AISI 316 stainless steel. Conclusion: Use the PUSH-ON JIC self-clamping end with GW UNF, type YJW110 only with the intended PUSH-ON hose specified for this fitting; do not use with different hoses or add external clamps.

PUSH-ON JIC self-clamping end with GW UNF, type YJW110

All products, General purpose hoses/

Additional information

Material	CS – steel (cast iron)

PUSH-ON JIC end fitting with internal UNF thread, type YJW110, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves adapted to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped with bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, brass, AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-YJW110-07-04	End. PUSH-ON JIC GW 7/16", hose 1/4", cone 74°	-	-	In stock	Enquiry
TI-YJW110-07-04-MO	End. PUSH-ON JIC G 7/16", hose 1/4", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-07-04-SS	End. PUSH-ON JIC G 7/16", hose 1/4", cone 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-09-06	End. PUSH-ON JIC G 9/16", hose 3/8", cone 74°	-	-	In stock	Enquiry
TI-YJW110-09-06-MO	End. PUSH-ON JIC G 9/16", hose 3/8", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-09-06-SS	End. PUSH-ON JIC G 9/16", hose 3/8", cone 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-12-08	End. PUSH-ON JIC G 3/4", hose 1/2", cone 74°	-	-	In stock	Enquiry
TI-YJW110-12-08-MO	End. PUSH-ON JIC G 3/4", hose 1/2", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-12-08-SS	End. PUSH-ON JIC G 3/4", hose 1/2", cone 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-14-08	End. PUSH-ON JIC G 7/8", hose 1/2", cone 74°	-	-	In stock	Enquiry
TI-YJW110-14-08-MO	End. PUSH-ON JIC GW 7/8", hose 1/2", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-14-08-SS	End. PUSH-ON JIC G 7/8", hose 1/2", cone 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-14-10-MO	End. PUSH-ON JIC G 7/8", hose 5/8", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-14-10-SS	End. PUSH-ON JIC GW 7/8", hose 5/8", cone 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-17-12	End. PUSH-ON JIC G 1.1/16", hose 3/4", cone 74°	-	-	In stock	Enquiry
TI-YJW110-17-12-MO	End. PUSH-ON JIC G 1.1/16", hose 3/4", cone 74°, MO58	-	-	In stock	Enquiry
TI-YJW110-17-12-SS	End. PUSH-ON JIC G 1.1/16", hose 3/4", st. 74°, AISI 316L	-	-	In stock	Enquiry
TI-YJW110-21-16-SS	End. PUSH-ON JIC G 1.5/16", hose 1", st. 74°, AISI 316L	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

PUSH-ON JIC end fitting with internal UNF thread, type YJW110, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves adapted to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped with bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, brass, AISI 316 steel.