Can BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) be crimped using standard crimping sleeves marked "-PH" and which hose types are compatible?

Yes . BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) can be crimped using standard crimping sleeves that are specifically marked with the suffix â-PHâ. The product is designed for crimping in hydraulic and industrial hoses; sleeves must match the hose construction and be additionally identified for use with PH (AISI 316) fittings to ensure proper material compatibility and crimp geometry. Compatible hose types: - Hydraulic hoses with textile or wire braid reinforcement specified by the hose manufacturer for use with crimped fittings. - Industrial hoses intended for hydraulic/fluid transfer that accept crimped ferrules. - Hoses where the manufacturerâs recommended sleeve profiles include a â-PHâ variant (indicating suitability for AISI 316 fittings). Do not use generic or nonâPH sleeves: always select crimping sleeves whose profile and material compatibility are approved by the hose maker and bear the â-PHâ marking. Follow hose manufacturer crimp specifications (sleeve type, crimp diameter, and tooling) to ensure leakâfree, safe assemblies.

Can BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) be crimped only with -PH sleeves or are other sleeve types acceptable?

BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) Format. must be crimped using sleeves suitable for the hose construction; when product description explicitly states âuse sleeves additionally marked with the letters â-PHâ at the end of the indexâ, it indicates that only -PH sleeves are specified/approved for correct crimping for this fitting/hose combination. Therefore you should use -PH sleeves designed for the hose type. Using other sleeve types risks improper crimping, poor sealing, reduced mechanical strength and may void certification/warranty. If you consider an alternative sleeve, consult the hose and fitting manufacturers and perform validation tests (burst, pull-off, leak) before use.

BEL 90° metric tube end, type ZMR211, light series, AISI 316 steel (PH)

Q: Is BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) compatible with industrial hose crimping machines using -PH sleeves?

Yes. BEL 90Â° metric tube end, type ZMR211, light series, AISI 316 steel (PH) Format is compatible with industrial hose crimping machines using -PH sleeves. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using crimping sleeves suitable for the type of hose, and specifies using sleeves additionally marked with the letters "-PH". Material AISI 316 and the BEL cutting-ring sealing are consistent with that application.

All products, Fittings for high-pressure hoses/

BEL 90° metric tube end, type ZMR211, light series, AISI 316 steel (PH)

Additional information

Material	SS – stainless steel
Standard length [m]	2

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMR211-06-03-SS-PH	End fitting 90° tubular 6 mm, hose 3/16", lightweight, AISI 316	5	-	In stock	Enquiry
TI-ZMR211-06-04-SS-PH	End fitting 90° tubular 6 mm, hose 1/4", lightweight, AISI 316	6	-	In stock	Enquiry
TI-ZMR211-08-04-SS-PH	End fitting 90° tubular 8 mm, hose 1/4", lightweight, AISI 316	6	-	In stock	Enquiry
TI-ZMR211-10-04-SS-PH	End fitting 90° tubular 10 mm, hose 1/4", lightweight, AISI 316	6	-	In stock	Enquiry
TI-ZMR211-10-05-SS-PH	End fitting 90° tubular 10 mm, hose 5/16", lightweight, AISI 316	8	-	In stock	Enquiry
TI-ZMR211-10-06-SS-PH	End. 90° tubular 10 mm, hose 3/8", lightweight, AISI 316	10	-	In stock	Enquiry
TI-ZMR211-12-05-SS-PH	End fitting 90° tubular 12 mm, hose 5/16", lightweight, AISI 316	8	-	In stock	Enquiry
TI-ZMR211-12-06-SS-PH	End fitting 90° tubular 12 mm, hose 3/8", lightweight, AISI 316	10	-	In stock	Enquiry
TI-ZMR211-12-08-SS-PH	End fitting 90° tubular 12 mm, hose 1/2", lightweight, AISI 316	12	-	In stock	Enquiry
TI-ZMR211-15-08-SS-PH	End fitting 90° tubular 15 mm, hose 1/2", lightweight, AISI 316	12	-	In stock	Enquiry
TI-ZMR211-18-10-SS-PH	End fitting 90° tubular 18 mm, hose 5/8", lightweight, AISI 316	16	-	In stock	Enquiry
TI-ZMR211-22-12-SS-PH	End fitting 90° tubular 22 mm, hose 3/4", lightweight, AISI 316	16	-	In stock	Enquiry
TI-ZMR211-28-16-SS-PH	End fitting 90° tubular 28 mm, hose 1", lightweight, AISI 316	25	-	In stock	Enquiry
TI-ZMR211-35-20-SS-PH	End fitting 90° tubular 35 mm, hose 1.1/4", lightweight, AISI 316	32	-	In stock	Enquiry
TI-ZMR211-42-24-SS-PH	End fitting 90° tubular 42 mm, hose 1.1/2", lightweight, AISI 316	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters “-PH” at the end of the index). Material: AISI 316 steel.