What are the corrosion resistance and certification details for the JIC straight bulkhead fitting with stainless steel UNF GZ, type SV made from AISI 316?

The JIC straight bulkhead fitting with stainless steel UNF GZ, type SV made from AISI 316 offers excellent corrosion resistance and clear certification attributes: Corrosion resistance - Material AISI 316 (marine-grade stainless steel) provides strong resistance to pitting and crevice corrosion in chloride-containing environments compared with 304 stainless steel. - Good resistance to general corrosion from acids, alkalis and many industrial chemicals; suitable for marine, offshore, chemical and food-processing applications. - Enhanced durability in wet, humid and salty atmospheres; not completely immune.continuous exposure to highly aggressive chloride environments (e.g., concentrated salt spray, stagnant seawater) may require additional protection or alternative alloys (e.g., duplex or 904L) for extreme cases. - Compatible with standard hydraulic fluids and many lubricants; periodic inspection recommended in highly corrosive service. Certification and standards - Material grade: AISI 316 stainless steel (commonly referenced as UNS S31600 / EN 1.4401), meeting typical chemical and mechanical requirements for AISI 316. - Fitting type: JIC 37Â° cone seal with external UNF thread.manufacture typically conforms to JIC/SAE dimensional standards for 37Â° flare fittings. - Manufacturing and testing: often produced under ISO 9001 quality systems; pressure testing and leak-tightness per relevant hydraulic/industrial standards typically applied by manufacturer (request specific test certificates). - Traceability: material certificates (EN 10204 2.1 / 3.1 or equivalent) can usually be supplied on request to verify composition and heat number. - Additional certifications (optional): NACE MR0175/ISO 15156 for sour service, RoHS, or ATEX compatibility depend on manufacturer options.confirm with supplier if required. For project use, request the manufacturerâs specific material certificate, pressure test report and any industry-specific approvals to ensure compliance with your applicationâs environmental and safety requirements.

Does the JIC straight bulkhead fitting with stainless steel UNF GZ, type SV support high-pressure hydraulic applications and what is its max working pressure?

The JIC straight bulkhead fitting with stainless steel UNF GZ, type SV is designed for high-pressure hydraulic applications typical of JIC 37Â° cone connections. Made from AISI 316 stainless steel and sealing on the external 37Â° cone, it offers good corrosion resistance and pressure capability. Typical maximum working pressures for JIC 37Â° fittings in AISI 316 range from about 350 to 420 bar depending on thread size and manufacturer specifications. For exact max working pressure for this specific type SV variant, consult the manufacturerâs datasheet or certification, since allowable pressure varies with size, wall thickness and assembly.

Is the JIC straight bulkhead fitting with stainless steel UNF GZ, type SV compatible with other UNF-sealed fittings and adapters?

Yes. the JIC straight bulkhead fitting with stainless steel UNF GZ, type SV is compatible with other fittings and adapters that seal on the external 37Â° cone and use the same UNF (Unified National Fine) external thread form and size. Because this fitting relies on the standard JIC 37Â° sealing surface (metal-to-metal cone) combined with an external UNF thread, it will properly mate with counterparts designed to accept a 37Â° external cone seal and the matching UNF internal thread, provided the thread pitch and diameter conform to the same UNF specification. Important compatibility points: - Sealing method: compatible only with fittings/adapters that seal on the external 37Â° cone (JIC 37Â°). It will not seal correctly with fittings that use other sealing types (e.g., O-ring face seal, BSP, metric cone seals, or pipe threads). - Thread standard: compatible only with components using the identical UNF thread size and pitch. Mismatched UNF sizes or different thread standards will not fit or will leak. - Material and usage: being AISI 316 stainless steel, it is mechanically and corrosion-resistant, but material doesnât affect thread/seal compatibilityâonly fitting type and dimensions do. - Assembly considerations: ensure proper torque and use of appropriate washers or backing hardware if required for bulkhead installation; damaged or nonstandard threads or cones can prevent a proper metal-to-metal seal. In summary, the JIC straight bulkhead fitting with stainless steel UNF GZ, type SV will work with other UNF-sealed fittings and adapters if they share the JIC 37Â° external cone sealing face and the exact UNF thread specification.

JIC straight bulkhead fitting with stainless steel UNF GZ, type SV

Additional information

Material	SS – stainless steel

Straight bulkhead fitting JIC 37° with external UNF thread (seal on external 37° cone). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HJ-SV-07-SS	Gasket fitting GZ JIC 7/16"-20, AISI 316	-	450	In stock	Enquiry
HJ-SV-08-SS	GZ JIC 1/2"-20 bulkhead fitting, AISI 316	-	450	In stock	Enquiry
HJ-SV-09-SS	GZ JIC 9/16"-18 bulkhead fitting, AISI 316	-	350	In stock	Enquiry
HJ-SV-12-SS	GZ JIC 3/4"-16 bulkhead fitting, AISI 316	-	350	In stock	Enquiry
HJ-SV-14-SS	Gasket fitting GZ JIC 7/8"-14, AISI 316	-	350	In stock	Enquiry
HJ-SV-17-SS	GZ JIC bulkhead fitting 1.1/16"-12, AISI 316	-	350	In stock	Enquiry
HJ-SV-21-SS	GZ JIC 1.5/16"-12 bulkhead fitting, AISI 316	-	290	In stock	Enquiry
HJ-SV-26-SS	GZ JIC 1.5/8"-12 bulkhead fitting, AISI 316	-	240	In stock	Enquiry
HJ-SV-30-SS	GZ JIC bulkhead fitting 1.7/8"-12, AISI 316	-	240	In stock	Enquiry