Can End - PN16 insert according to EN14420-4, carbon steel be used with RS shell clamps and TI-LR/TI-LDR crimping for industrial flexible hose connections up to 25 bar?

Yes. End - PN16 insert according to EN14420-4, carbon steel can be used with RS shell clamps and with TI-LR/TI-LDR crimping for industrial flexible hose connections up to 25 bar, given the product description: - The insert is manufactured to EN14420-4 and features a smooth âtailâ specifically for mounting with RS shell clamps or for crimping with TI-LR and TI-LDR fittings. - Material is carbon steel, galvanized . suitable for general industrial use where corrosion resistance is adequate. - Working pressure is specified up to 25 bar, which covers your stated limit. Important considerations: ensure compatibility of hose inner diameter and wall material with the insert tail profile, confirm clamp/crimping dimension match (RS shell clamp or TI-LR/TI-LDR tooling), and verify that the galvanized carbon steel meets the corrosion and temperature requirements of your application. Perform appropriate assembly and pressure testing per applicable standards and manufacturer instructions.

Can End - PN16 insert according to EN14420-4, carbon steel be fitted with a smooth "tail" for RS shell clamps or TI-LR/TI-LDR crimping for industrial hose use?

Yes. The End - PN16 insert according to EN14420-4, carbon steel can be supplied with a smooth "tail" for mounting with RS shell clamps or for crimping with TI-LR/TI-LDR. It is designed for industrial hose connections (flexible hoses), made of galvanized carbon steel, and rated for working pressures up to 25 bar.

Can End - PN16 insert according to EN14420-4, carbon steel withstand repeated mounting with RS shell clamps and TI-LR/TI-LDR crimping?

Yes. End - PN16 insert according to EN14420-4, carbon steel is designed with a smooth âtailâ specifically for mounting with RS shell clamps or for crimping with TI-LR/TI-LDR. Made of galvanized carbon steel and rated for industrial use (flexible hose connections) at working pressures up to 25 bar, it is suitable for repeated mounting with RS shell clamps and for crimping with TI-LR/TI-LDR, provided proper installation procedures and tooling recommended for those systems are followed. Ensure compatibility of hose ID, clamp/crimp dimensions and follow manufacturer torque/crimping specifications and inspection intervals to maintain seal and mechanical integrity during repeated service.

End – PN16 insert according to EN14420-4, carbon steel

All products, Flange couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	1.22

End piece – insert according to EN14420-4 with a smooth “tail” for mounting with RS shell clamp or for crimping with TI-LR, TI-LDR. For use in the industry, e.g., for connections with flexible hoses. Material: carbon steel, galvanized. Working pressure: up to 25 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TK-RKOPS-015-013	End with collar neck (RS) DN15 PN16, hose 13 mm, galvanized steel.	12	25	In stock	Enquiry
TK-RKOPS-020-019	End with collar neck (RS) DN20 PN16, hose 19 mm, galvanized steel.	20	25	In stock	Enquiry
TK-RKOPS-025-025	End with collar neck (RS) DN25 PN16, hose 25 mm, galvanized steel.	25	25	In stock	Enquiry
TK-RKOPS-032-032	End with collar neck (RS) DN32 PN16, hose 32 mm, galvanized steel.	32	25	In stock	Enquiry
TK-RKOPS-040-038	End with collar neck (RS) DN40 PN16, hose 38 mm, galvanized steel.	38	25	In stock	Enquiry
TK-RKOPS-040-040	End with collar neck (RS) DN40 PN16, hose 40 mm, galvanized steel.	40	25	In stock	Enquiry
TK-RKOPS-050-050	End with collar neck (RS) DN50 PN16, hose 50 mm, galvanized steel.	50	25	In stock	Enquiry
TK-RKOPS-050-051	End with collar neck (RS) DN50 PN16, hose 51 mm, galvanized steel.	50	25	In stock	Enquiry
TK-RKOPS-065-063	End with collar neck (RS) DN65 PN16, hose 63 mm, galvanized steel.	65	25	In stock	Enquiry
TK-RKOPS-065-065	End with collar. machined neck. (RS) DN65 PN16, hose 65 mm, galvanized steel.	65	25	In stock	Enquiry
TK-RKOPS-080-076	End with collar neck (RS) DN80 PN16, hose 76 mm, galvanized steel.	75	25	In stock	Enquiry
TK-RKOPS-080-080	End with collar neck (RS) DN80 PN16, hose 80 mm, galvanized steel.	80	25	In stock	Enquiry
TK-RKOPS-100-100	End with collar neck (RS) DN100 PN16, hose 100 mm, galvanized steel.	100	25	In stock	Enquiry
TK-RKOPS-100-102	End with collar neck (RS) DN100 PN16, hose 102 mm, galvanized steel.	100	25	In stock	Enquiry
TK-RKOPS-125-125	End with collar neck (RS) DN125 PN16, hose 125 mm, galvanized steel.	125	25	In stock	Enquiry
TK-RKOPS-125-127	End with collar. machined neck (RS) DN125 PN16, hose 127 mm, galvanized steel.	125	25	In stock	Enquiry
TK-RKOPS-150-150	End with collar neck (RS) DN150 PN16, hose 150 mm, galvanized steel.	150	25	In stock	Enquiry
TK-RKOPS-150-152	End with collar neck (RS) DN150 PN16, hose 152 mm, galvanized steel.	150	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End piece – insert according to EN14420-4 with a smooth “tail” for mounting with RS shell clamp or for crimping with TI-LR, TI-LDR. For use in the industry, e.g., for connections with flexible hoses. Material: carbon steel, galvanized. Working pressure: up to 25 bar.