Grease nipple compressed air LUB, series SYNTESI®

Additional information

Maximum operating temperature [°C]

50

Minimum operating temperature [°C]

-10

Grease nipple pneumatic to straight and most widely used solution, ensuring correct lubrication mist oil, devices actuating in installations pneumatic. process suction oil takes place due to a drop pressure generated in venturi Venturi. amount drops oil introduced for stream air is dosed through needle adjustment. On rear and front surface lubricator is found the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. capacity bowl: 60 cm³ – SY1, 130 cm³ – SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8″ BSP female ÷ 3/8″ for SY1 and 3/8″ BSP female ÷ 1″ for SY2. Flow rate: 1600 l/min – 1/8″, 3000 l/min – 1/4″, 3650 l/min – 3/8″, 6100 l/min – 1/2″, 3/4″, 1″ (at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
MW-5611L101Grease nipple LUB SY1 1/8--In stock0 zł
Enquiry
MW-5612L102Grease nipple LUB SY1 1/4--In stock0 zł
Enquiry
MW-5613L103Grease nipple LUB SY1 3/8--In stock0 zł
Enquiry
MW-5623L103Grease nipple LUB SY2 3/8--In stock0 zł
Enquiry
MW-5624L104Grease nipple LUB SY2 1/2--In stock0 zł
Enquiry
MW-5625L105Grease nipple LUB SY2 3/4--In stock0 zł
Enquiry
MW-5626L106Grease nipple LUB SY2 1--In stock0 zł
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Grease nipple pneumatic to straight and most widely used solution, ensuring correct lubrication mist oil, devices actuating in installations pneumatic. process suction oil takes place due to a drop pressure generated in venturi Venturi. amount drops oil introduced for stream air is dosed through needle adjustment. On rear and front surface lubricator is found the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. capacity bowl: 60 cm³ – SY1, 130 cm³ – SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: od -10°C up to +50°C. Connection: 1/8″ BSP female ÷ 3/8″ for SY1 and 3/8″ BSP female ÷ 1″ for SY2. Flow rate: 1600 l/min – 1/8″, 3000 l/min – 1/4″, 3650 l/min – 3/8″, 6100 l/min – 1/2″, 3/4″, 1″ (at an inlet pressure of 6 bar Δp = 1 bar).

Additional information

Maximum operating temperature [°C]

50

Minimum operating temperature [°C]

-10

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?