Does the Arbor for cutting the inner layer of hose rubber, type FSI support mandrel diameters from 1/2" to 2"?

Arbor for cutting the inner layer of hose rubber, type FSI supports mandrel diameters from 1/2" to 2". It is supplied with a cutting knife, length adjustment ring, and securing screws, and is compatible with the tool holder of the FINN POWER FS50 device.

Can the Arbor for cutting the inner layer of hose rubber, type FSI be ordered with custom mandrel diameters outside 1/2"â2"?

Arbor for cutting the inner layer of hose rubber, type FSI. can it be ordered with custom mandrel diameters outside 1/2"â2"? No. The Arbor for cutting the inner layer of hose rubber, type FSI is supplied with mandrel diameters ranging from 1/2" to 2" and is specified as such. It is designed to be compatible with the FINN POWER FS50 tool holder and is standardly supplied with a cutting knife, length adjustment ring, and securing screws. There is no indication in the provided description that mandrel diameters outside the 1/2"â2" range are available as a custom option. If you need a different diameter, contact the manufacturer or supplier to confirm whether customization or an alternative product is possible.

Arbor for cutting the inner layer of hose rubber, type FSI

Q: Is the Arbor for cutting the inner layer of hose rubber, type FSI compatible with the FINN POWER FS50 tool holder and does it include the cutting knife, length adjustment ring, and securing screws?

Yes. The Arbor for cutting the inner layer of hose rubber, type FSI is compatible with the FINN POWER FS50 tool holder and is standardly supplied with a cutting knife, length adjustment ring, and securing screws. It is designed for machining the inner layer of cuttable hydraulic hose rubber and is available in mandrel diameters from 1/2" to 2".

Additional information

Material	CS – steel (cast iron)

FSI type mandrel used for machining the inner layer of cuttable hydraulic hose rubber. Standardly supplied with a cutting knife, length adjustment ring, and securing screws. Compatible with the tool holder of the FINN POWER FS50 device. Mandrel diameter: from 1/2″ to 2″.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
FP-FSI-08	Internal cutting tool 1/2"	-	-
FP-FSI-10	Internal cutting tool 5/8"	-	-
FP-FSI-12	3/4" internal cutting tool	-	-
FP-FSI-16	Internal cutting tool 1	-	-
FP-FSI-20	Internal cutting tool 1.1/4"	-	-
FP-FSI-24	Internal cutting tool 1.1/2"	-	-
FP-FSI-32	Internal cutting tool 2	-	-

FSI type mandrel used for machining the inner layer of cuttable hydraulic hose rubber. Standardly supplied with a cutting knife, length adjustment ring, and securing screws. Compatible with the tool holder of the FINN POWER FS50 device. Mandrel diameter: from 1/2″ to 2″.