Does the DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel require a specific crimping sleeve size for proper hose installation?

Yes. The DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel requires a crimping sleeve sized to the specific hose type and dimensions. The product is designed for crimping in hydraulic and industrial hoses using a sleeve suitable for that hose; correct sleeve diameter and length must match the hoseâs inner/outer diameters, reinforcement type, and the manufacturerâs crimping specifications to ensure a secure, leak-free assembly. Using an incorrect sleeve size or profile can lead to poor crimp geometry, leaks, or hose failure. Always follow the hose makerâs and crimping equipment manufacturerâs recommended sleeve size, crimping die, and crimping procedure for the exact hose used with the DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel.

Is a special crimping procedure required for installing the DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel?

No special crimping procedure is required. The DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel is designed for crimping with a crimping sleeve suitable for the specific hose type. Use the correct sleeve profile and dimensions matched to the hose, follow the hose manufacturerâs and crimping machineâs standard settings (correct die, pressure, and number of crimps), and ensure proper inspection of crimp diameter and seal integrity after assembly.

Can the DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel be used with metric-threaded hose fittings?

Yes. The DKL-FL 90Â° hydraulic end, type ZMW240, light series, carbon steel can be used with metric-threaded hose fittings. The product description specifies an internal metric thread and nut, face seal (DKL-FL), 90Â° angle, light series. which indicates it is designed to accept metric-threaded hose fittings and to be assembled using the corresponding nut. It is intended for crimping with a crimping sleeve appropriate to the hose type, so ensure you use the correct sleeve and crimping procedure for your hose. Also verify thread size and pressure rating compatibility between the hose fitting, nut, and fitting body, and confirm material and galvanization meet your applicationâs corrosion and strength requirements.

DKL-FL 90° hydraulic end, type ZMW240, light series, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, face seal (DKL-FL), 90° angle, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW240-14-04	End. 90° G1/2 M14x1.5, hose 1/4", butt	6	-	In stock	Enquiry
TI-ZMW240-16-05	End. 90° G1/2 M16x1.5, hose 5/16", butt	8	-	In stock	Enquiry
TI-ZMW240-18-06	End. 90° G1/2 M18x1.5, hose 3/8", butt	10	-	In stock	Enquiry
TI-ZMW240-20-06	End. 90° G1/2 M20x1.5, hose 3/8", butt	10	-	In stock	Enquiry
TI-ZMW240-22-08	End. 90° G1/2" M22x1.5, hose 1/2", butt	12	-	In stock	Enquiry
TI-ZMW240-26-10	End. 90° G1 M26x1.5, hose 5/8", butt	16	-	In stock	Enquiry
TI-ZMW240-27X1,5-10	End. 90° G1" M27x1.5, hose 5/8", butt	16	-	In stock	Enquiry
TI-ZMW240-33-12	End. 90° G1 M33x2, hose 3/4", butt weld	20	-	In stock	Enquiry
TI-ZMW240-36-16	End. 90° G1" M36x2, hose 1", butt	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, face seal (DKL-FL), 90° angle, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.