Is the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® compatible with pressures above 2 bar or temperatures exceeding +76Â°C?

No. The Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® is specified for a maximum working pressure of up to 2 bar and an operating temperature up to +76Â°C. Using it above 2 bar or at temperatures exceeding +76Â°C would exceed the productâs rated limits and may lead to failure, leaks, or safety hazards. If your application requires higher pressure or temperature resistance, choose a nozzle rated for those conditions or contact the manufacturer for a suitable alternative.

Can the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® be used with fluids incompatible with acetal material?

Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® is made of acetal. If a fluid is chemically incompatible with acetal, this nozzle should not be used with that fluid because acetal can degrade, swell, crack or lose mechanical properties when exposed to incompatible solvents, strong acids, bases or certain hydrocarbons. Additionally, operating conditions (up to 2 bar and +76Â°C) do not protect against chemical attack. Before use, consult the fluidâs chemical compatibility with acetal or choose a nozzle made from a resistant material.

Does the Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® come in any sizes other than 1.1/4" and 2.1/2"?

No. Flat wide nozzle for coolant, 1/2" system, LOC-LINEÂ® Format is only available in the two sizes listed: 1.1/4" and 2.1/2". The product description specifies availability in sizes 1.1/4" and 2.1/2" (material: acetal; working pressure up to 2 bar; operating temperature up to +76Â°C), so no other sizes are indicated.

Flat wide nozzle for coolant, 1/2″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

Wide flat nozzle for LOC-LINE® coolant – 1/2″ system. Available in sizes 1.1/4″ and 2.1/2″. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-59867	Flat nozzle with a gap of 32x4.2 mm (system 1/2")	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Wide flat nozzle for LOC-LINE® coolant – 1/2″ system. Available in sizes 1.1/4″ and 2.1/2″. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.