Can the GENESIS ToiVac N hose end, EVA withstand temperatures between -40Â°C and +60Â°C without degrading?

Yes. The GENESIS ToiVac N hose end, EVA Format is specified as being made of EVA with an operating temperature range from -40Â°C to +60Â°C. Based on that specification, it is designed to withstand temperatures within that range without degrading under normal operating conditions.

How should I apply the special adhesive when installing the GENESIS ToiVac N hose end, EVA to ensure a secure bond?

Apply the special adhesive sparingly and evenly to the threaded area of the GENESIS ToiVac N hose end, EVA before screwing it onto the hose. Steps: 1. Clean and dry both the hose end threads and the hose mating surface to remove dirt, oils or moisture. 2. Apply a thin, continuous bead of the adhesive around the hoseâs outer thread or the inner thread of the end piece-avoid overapplication to prevent squeeze-out. 3. Screw the GENESIS ToiVac N hose end, EVA onto the hose firmly until fully seated, turning smoothly to spread the adhesive evenly across the threaded joint. 4. Wipe away any excess adhesive immediately. 5. Allow the adhesive to cure per manufacturer instructions, ensuring ambient temperature is within the productâs operating range (â40Â°C to +60Â°C) for optimal bond strength.

Is the GENESIS ToiVac N hose end, EVA compatible with other hose materials or brands?

The GENESIS ToiVac N hose end, EVA Format is specifically designed for mounting to the GENESIS ToiVac N hose and is installed by screwing onto that hose and securing with a special adhesive. Because it is tailored for that hoseâs dimensions and uses a dedicated adhesive, compatibility with other hose materials or brands cannot be guaranteed. Practical considerations: - Mechanical fit: The screw-on connection is engineered for the GENESIS ToiVac N hose profile; other hoses may differ in diameter, wall thickness or thread/profile and may not achieve a secure, leak-free fit. - Adhesive bonding: The prescribed adhesive is chosen for compatibility with EVA and the GENESIS ToiVac N hose material. Other hose materials (rubber, PVC, polyurethane, silicone, etc.) may not bond reliably with that adhesive. - Temperature range: The EVA end piece operates from â40Â°C to +60Â°C; compatibility with hoses that expand/contract differently across that range could affect the seal and mechanical integrity. If you need to use this end piece on a different hose or brand, test-fit and perform bonding and pressure/leak tests under expected operating conditions, or consult the hose manufacturer for confirmation. For reliable performance, use the GENESIS ToiVac N hose as intended.

GENESIS ToiVac N hose end, EVA

Air and water hoses, All products/

Additional information

Material	P – material (plastic)

End piece designed for mounting to the GENESIS ToiVac N hose. Installation is done by screwing the end piece onto the hose and adhering it with a special adhesive. Material: EVA. Operating temperature: from -40°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SC-GENESIS-TV-N-051K	GENESIS hose end ToiVac N 51 mm	-	-	In stock	Enquiry
SC-GENESIS-TV-N-063K	GENESIS hose end ToiVac N 63 mm	-	-	In stock	Enquiry
SC-GENESIS-TV-N-076K	GENESIS hose end ToiVac N 76 mm	-	-	In stock	Enquiry
SC-GENESIS-TV-N-102K	GENESIS hose end ToiVac N 102 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End piece designed for mounting to the GENESIS ToiVac N hose. Installation is done by screwing the end piece onto the hose and adhering it with a special adhesive. Material: EVA. Operating temperature: from -40°C to +60°C.