Is the Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N compatible with steam up to 10 bar and Viton seals for high-temperature use?

Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N . based on the provided description . is rated for steam up to 10 bar and offers Viton (FKM) seals suitable for higher temperatures. The technical data show a working pressure of 50 bar (with a specific note: for steam 10 bar) and sealing options NBR/Viton. The operating temperature range with Viton is listed as -25Â°C to +200Â°C, which covers typical high-temperature steam applications. Therefore, it is compatible with steam up to 10 bar when fitted with Viton seals.

Can the Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N be used with potable water and food-grade fluids?

Based on the provided description, the Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N is designed primarily for liquids such as water, steam, oils, and fuels and offers high corrosion resistance. However, suitability for potable water and food-grade fluids depends on materials and seals: nickel-plated/chrome-plated brass and AISI 316 steel can be acceptable for potable water, but nickel plating and certain brass alloys may leach contaminants unless specifically certified for drinking water. Seals offered are NBR or Viton-neither is inherently food-grade unless FDA/WRAS/NSF approvals are stated. No certification for potable or food-grade use is mentioned in the description, so you should not assume compliance. Recommendation: request manufacturer certifications (NSF/WRAS/KTW/FDA) and confirmation of lead-free/brass alloy composition and approved elastomers before using with potable water or food-grade fluids.

Does the Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N require specific maintenance for corrosion resistance?

Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N does not require special maintenance beyond standard practices to preserve its corrosion resistance. Product features contributing to corrosion resistance include nickel-plated/chrome-plated brass construction and availability in AISI 316 stainless steel. To maintain corrosion resistance and service life, follow these recommendations: - Regular inspection: check for surface damage, pitting or loss of plating, especially in aggressive environments (salt, chemicals, steam). - Clean periodically: rinse with fresh water after exposure to corrosive media (e.g., seawater, salty spray, chemical splashes); remove deposits, dirt and residues that can trap moisture. - Avoid incompatible fluids: use appropriate seal material (NBR or Viton) for the fluid and temperature; some aggressive chemicals may attack brass plating or seals. - Replace damaged parts: if plating is worn through or there is visible corrosion, replace the socket or switch to the AISI 316 steel version for higher corrosion environments. - Proper storage: store dry and protected from humidity and corrosive atmospheres. - Use recommended combinations: do not couple series 1300N with series 1300 to avoid improper seating or wear that could expose base material. Following these standard maintenance and handling steps will preserve the Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300Nâs corrosion resistance in typical applications (water, steam, oils, fuels).

Quick-connection socket DN5.8 with valve, threaded, nickel-plated brass, series 1300N

All products, General-purpose low-pressure quick couplings/

Additional information

Material	SS – stainless steel

Universal quick coupling socket with valve DN5.8, with external or internal BSP thread. Double shut-off in standard TEMA 1300N, popular in the Scandinavian market, designed primarily for liquids to prevent leaks during disconnection (for water, steam, oils, and fuels). It features high corrosion resistance and large flow rates with small external dimensions. couplings of series 1300N should not be combined with series 1300. Material: nickel-plated and chrome-plated brass / AISI 316 steel. Performance: 13.5 l/min (Δp = 1 bar, Kv = 0.81 – water), 760 l/min (Pe=6 bar, Δp=0.5 bar – air). Working pressure: 50 bar (for steam 10 bar). Sealing: NBR / viton. Operating temperature: from -20°C to +100°C (NBR), from -25°C to +200°C (viton).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RE-1300KBAW17MPN	Quick coupling socket 1300N, double shut-off, GZ 3/8" BSP, nickel-plated brass, NBR	-	50	In stock	Enquiry
RE-1300KBIW13EVX	Quick coupling socket 1300N, double shut-off, GW 1/4" BSP, AISI 316, viton	-	50	In stock	Enquiry
RE-1300KBIW13MPN	Quick coupling socket 1300N, two-way shut-off, GW 1/4" BSP, nickel-plated brass, NBR	-	50	In stock	Enquiry
RE-1300KBIW17MPN	Quick coupling socket 1300N, double shut-off, GW 3/8" BSP, nickel-plated brass, NBR	-	50	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Universal quick coupling socket with valve DN5.8, with external or internal BSP thread. Double shut-off in standard TEMA 1300N, popular in the Scandinavian market, designed primarily for liquids to prevent leaks during disconnection (for water, steam, oils, and fuels). It features high corrosion resistance and large flow rates with small external dimensions. couplings of series 1300N should not be combined with series 1300. Material: nickel-plated and chrome-plated brass / AISI 316 steel. Performance: 13.5 l/min (Δp = 1 bar, Kv = 0.81 – water), 760 l/min (Pe=6 bar, Δp=0.5 bar – air). Working pressure: 50 bar (for steam 10 bar). Sealing: NBR / viton. Operating temperature: from -20°C to +100°C (NBR), from -25°C to +200°C (viton).