Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial pressure gauge 63 mm with bottom connection FM 631, manufactured according to standard EN 837-1 in a stainless steel housing with glycerin filling. The gauge is resistant to shocks, vibrations, humidity, with increased resistance to sudden pressure spikes, intended for simple measurements of low-viscosity liquids, vapors, and gases that do not corrode copper alloys and do not crystallize. The glycerin filling of the gauge helps reduce pointer fluctuations and decreases wear on moving parts of the mechanism during pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge that could damage internal components. The measurement range should be selected according to the working pressure, so that the constant or slowly changing pressure does not exceed 75% of the range; pulsating pressure does not exceed 60% of the range, and pressure impulses do not exceed the maximum range. Dial diameter: 63 mm. Material: housing - AISI304 steel, window - plexiglass, connection - brass, mechanism - brass and copper alloys, filling - glycerin. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum +60°C. Bottom connection: GZ 1/4" BSP (G 1/4 B, EN ISO 228-1, B indicates thread tolerance).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial pressure gauge 63 mm with rear connection FM 632, manufactured according to standard EN 837-1 in a stainless steel housing with glycerin filling. The gauge is resistant to shocks, vibrations, humidity, with increased resistance to sudden pressure spikes, intended for simple measurements of low-viscosity liquids, vapors, and gases that do not corrode copper alloys and do not crystallize. The glycerin filling of the gauge helps reduce pointer fluctuations and minimizes wear on moving parts of the mechanism during pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge, which could damage internal components. The measurement range should be selected according to the working pressure, ensuring that constant or slowly changing pressure does not exceed 75% of the range; pulsating pressure does not exceed 60% of the range, and pressure impulses do not exceed the maximum range. Dial diameter: 63 mm. Material: housing - AISI 304 steel, window - plexiglass, connection - brass, mechanism - brass and copper alloys, filling - glycerin. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum +60°C. Rear connection: GZ 1/4" BSP (G 1/4 B, EN ISO 228-1, B indicates thread tolerance).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial pressure gauge 63 mm with rear connection for installation FM 633, manufactured according to standard EN 837-1 in a stainless steel housing with glycerin filling. The pressure gauge is resistant to shocks, vibrations, humidity, with increased resistance to sudden pressure spikes, intended for simple measurements of low-viscosity liquids, vapors, and gases that do not corrode copper alloys and do not crystallize. The glycerin filling of the gauge helps reduce pointer fluctuations and minimizes wear on moving parts of the mechanism during pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge, which could damage internal components. The measurement range should be selected according to the working pressure, so that the constant or slowly changing pressure does not exceed 75% of the range; the pulsating pressure does not exceed 60% of the range, and pressure impulses do not exceed the maximum range. Dial diameter: 63 mm. Material: housing - AISI 304 steel, window - plexiglass, connection - brass, mechanism - brass and copper alloys, filling - glycerin. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum +60°C. Rear connection: GZ 1/4" BSP (G 1/4 B, EN ISO 228-1, B indicates thread tolerance).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal and external threaded connection for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a socket of a different size. Designed for non-aggressive liquids and gases, for the installation of pressure gauges, taps, pressure valves, and other accessories equipped with this type of connection. Material: AISI 316Ti steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal and external threaded connection for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a socket of a different size. Designed for non-aggressive liquids and gases, for mounting pressure gauges, taps, and pressure valves, as well as other accessories equipped with this type of connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket for panel installation for FM 632 type pressure gauges with rear connection.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel needle shut-off valve with manometer connection, used in hydraulic systems as an isolating element for the manometer from the installation, protecting against overload and pressure spikes during opening and allowing for replacement. Simple version (FT290) and 90° angled version (FT291). Panel mounting possible on the thread under the knob. Available in AISI 316 stainless steel upon special request. Material: galvanized carbon steel (body), carbon steel (needle), polyamide 66 (knob). Sealing: NBR/PTFE. Working pressure: 350 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal and external threaded nipple for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a larger size socket. The pressure gauge is mounted to the internal thread d1. This connection is self-sealing – the cone at the bottom of the hole d1 presses into the hole of the centering plug of the pressure gauge connection. Threads d1 and d2 are secured against loosening of the connection by a special adhesive. Designed for non-aggressive liquids and gases, for the installation of pressure gauges, taps, and pressure valves, as well as other accessories equipped with this type of connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber cover for a pressure gauge with a dial diameter of 63 mm, serves as protection against impacts and damage. Designed for pressure gauges with bottom and rear connections.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial adapter for direct connection of the pressure gauge to the hydraulic system. Restricted oil flow through a small hole in the adapter dampens sudden pressure spikes in the system. The rotating nut allows for proper positioning of the pressure gauge. Available upon special request in AISI 316 stainless steel. Material: galvanized steel. Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle shut-off valve with a manometer connection, used in hydraulic systems as an isolating element for the manometer from the installation. The valve protects the manometer from overload and pressure spikes during opening and allows for its replacement. It is available in two versions: straight – in-line (FPE) and angular 90° (FPEA). It has a thread under the knob, allowing for panel mounting. Material: nickel-plated brass (body), carbon steel (needle), galvanized steel (connection - nut), plastic (knob). Sealing: NBR. Connection: GW 1/4" BSP (manometric), GZ 1/4" BSPT. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor serving as additional equipment for shut-off valves of type FPE and FPEA. Working pressure: 350 bar. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal and external threaded nipple for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a larger size socket. The pressure gauge is mounted to the internal thread d1. This connection is self-sealing – the cone at the bottom of the hole d1 presses into the centering hole of the pressure gauge connection. Threads d1 and d2 are secured against loosening of the connection by a special adhesive. Designed for non-aggressive liquids and gases, for the installation of pressure gauges, taps, and pressure valves, as well as other accessories equipped with this type of connection. Material: AISI 316Ti steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle valve with manometer connection, used in hydraulic systems as an isolating element for the manometer from the installation. The valve protects the manometer from overload and pressure spikes during opening and allows for its replacement. It is available in two versions: straight – in-line (FPE) and angular 90° (FPEA). It has a thread under the knob, allowing for panel mounting. An adapter with index DC-FPE-FPEA must be used for the valve, tightened to the connection with internal thread (ordered separately). Material: nickel-plated brass (body), carbon steel (needle), galvanized steel (connection - nut), plastic (knob). Sealing: NBR. Connection: 2 x 1/4" BSP female (manometric). Operating temperature: from -20°C to +100°C.
