Is the 16-channel comb nozzle with adapter, polyamide, series 470 compatible with standard M12x1.25 threaded fittings and adapters?

Yes. The 16-channel comb nozzle with adapter, polyamide, series 470 is finished with an external thread M12x1.25 and supplied with an adapter, so it is compatible with standard M12x1.25 threaded fittings and adapters. The nozzle body is blue polyamide, the adapter is aluminum; rated maximum pressure is 6 bar and operating temperature range is -10Â°C to +50Â°C.

Can the 16-channel comb nozzle with adapter, polyamide, series 470 be used for food-contact cleaning applications under its specified temperature range?

No - the 16-channel comb nozzle with adapter, polyamide, series 470 should not be assumed safe for food-contact cleaning based solely on the provided description. Although it operates between â10Â°C and +50Â°C and is intended for cleaning and cooling, the materials listed (blue polyamide nozzle and aluminum adapter) and the specification do not declare food-grade certification, FDA/EU food-contact compliance, or suitability for sanitary use. For food-contact applications you need documented food-grade materials, traceability, and validation for cleaning chemicals and temperatures used. Obtain manufacturer confirmation or a declaration of conformity stating the nozzle and adapter meet relevant food-contact regulations before use.

Does the 16-channel comb nozzle with adapter, polyamide, series 470 require a specific torque for the M12x1.25 external thread?

Based on the provided description of the 16-channel comb nozzle with adapter, polyamide, series 470. finished with external thread M12x1.25 and intended for cleaning and cooling, with a polyamide nozzle and aluminum adapter, maximum pressure 6 bar and operating temperature â10Â°C to +50Â°C. no specific torque value for the M12x1.25 external thread is given. Therefore, unless the manufacturer supplies a recommended tightening torque, follow general practice for sealing and mounting M12x1.25 connections with the materials involved: - Use a moderate hand-to-tool tightening followed by a final torque in the typical range for a stainless/aluminum threaded connection of this size: approximately 10â20 Nm. - Avoid over-torquing to prevent damaging the polyamide nozzle or aluminum adapter. - If using a thread sealant or tape, apply it according to the sealant manufacturerâs instructions and reduce torque slightly as needed. - For critical or pressurized applications, contact the manufacturer or supplier of the 16-channel comb nozzle with adapter, polyamide, series 470 for the exact recommended torque and installation procedure.

Nozzle comb 16 channel with an adapter, polyamide, series 470

Air guns, All products/

Additional information

Nozzle comb 16 channel, flat-jet, terminated a thread external M12x1.25. ideal for cleaning and cooling. Z an adapter. Material: blue polyamide (nozzle), aluminum (Adapter). pressure Maximum: 6 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-470K60	Nozzle flat 16 jet, wide 47 mm, M12x1.25 male, (POM)	-	6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nozzle comb 16 channel, flat-jet, terminated a thread external M12x1.25. ideal for cleaning and cooling. Z an adapter. Material: blue polyamide (nozzle), aluminum (Adapter). pressure Maximum: 6 bar. Operating temperature: from -10°C to +50°C.