Can Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 be used with hoses other than the specified PUSH-ON hose or secured with clamps?

No. Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 is specifically designed for the matching PUSH-ON hose and relies on a special groove profile that interacts with that hoseâs material, dimensions and braid. It must be mounted without clamps or bands. Using it with other hoses or adding external clamps can prevent proper self-clamping, damage the hose or fitting, and compromise performance and safety. Use only the specified PUSH-ON hose and installation method; follow the hoseâs working-pressure and temperature limits (-40Â°C to +80Â°C).

Can Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 be used with other hoses or secured with clamps?

Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 is specifically designed for a self-clamping PUSH-ON hose and must be mounted without clamps or bands. It features a special groove profile matched to the PUSH-ON hose material, dimensions and braid, which creates the sealing/clamping action. It should not be used with other hoses or be secured with external clamps or bands, as doing so can damage the hose and compromise performance. Operating temperature: -40Â°C to +80Â°C; working pressure per the PUSH-ON hose specifications. Materials: galvanized carbon steel, AISI 316 steel.

Is Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 compatible with other hose types or clamp fastening?

Self-clamping end 45Â° PUSH-ON with GW BSP, type YBW310 is specifically designed for PUSH-ON self-clamping hoses and must be used only with those hoses. Its special groove profile matches the material, dimensions and braid structure of PUSH-ON hoses, allowing the hose to clamp onto the fitting without clamps or bands. It must not be used with other hose types, nor should other hoses be fastened to it using bands or clampsâdoing so can damage the hose and compromise the connection. Operating temperature: -40Â°C to +80Â°C; working pressure per PUSH-ON hose specifications. Materials: galvanized carbon steel or AISI 316 steel.

Self-clamping end 45° PUSH-ON with GW BSP, type YBW310

All products, General purpose hoses/

Additional information

Material	CS – steel (cast iron)

45° PUSH-ON end fitting with internal BSP thread, type YBW310, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, AISI 316 steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-YBW310-04-04	End. PUSH-ON 45° G 1/4" BSP, hose 1/4", cone 60°	-	-
TI-YBW310-04-04-SS	End. PUSH-ON 45° G 1/4" BSP, hose 1/4", st. 60°, AISI 316L	-	-
TI-YBW310-06-06	End. PUSH-ON 45° G 3/8" BSP, hose 3/8", cone 60°	-	-
TI-YBW310-06-06-SS	End. PUSH-ON 45° G 3/8" BSP, hose 3/8", st. 60°, AISI 316L	-	-
TI-YBW310-08-08	End. PUSH-ON 45° GW 1/2" BSP, hose 1/2", cone 60°	-	-
TI-YBW310-08-08-SS	End. PUSH-ON 45° GW 1/2" BSP, hose 1/2", st. 60°, AISI 316L	-	-
TI-YBW310-12-12	End. PUSH-ON 45° G 3/4" BSP, hose 3/4", cone 60°	-	-
TI-YBW310-12-12-SS	End. PUSH-ON 45° G 3/4" BSP, hose 3/4", st. 60°, AISI 316L	-	-
TI-YBW310-16-16	End. PUSH-ON 45° GW 1" BSP, hose 1", cone 60°	-	-

45° PUSH-ON end fitting with internal BSP thread, type YBW310, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, AISI 316 steel.