Can the 90Â° angle plug connector with male thread, stainless steel, AI-60115 withstand continuous use at 15 bar and +200Â°C without seal degradation?

Yes. The 90Â° angle plug connector with male thread, stainless steel, AI-60115 is specified for continuous operation up to +225Â°C and a working pressure of 15 bar, with seals made of Viton. Viton (FKM) retains good chemical and thermal stability in the +200Â°C range for continuous service in many applications. Because the connector is entirely AISI 316L stainless steel with no plastic parts, the mechanical integrity at 15 bar and +200Â°C is appropriate. Caveats: long-term seal life at +200Â°C depends on factors such as exposure time, chemical aggressiveness, dynamic sealing/movement, and thermal cycling. For aggressive chemicals or prolonged continuous exposure at the top temperature limit, periodic inspection or validation testing is recommended. Under typical conditions matching the stated specifications, the AI-60115 should withstand continuous use at 15 bar and +200Â°C without seal degradation.

Is the 90Â° angle plug connector with male thread, stainless steel, AI-60115 suitable for food and pharmaceutical sterilization processes?

Yes. The 90Â° angle plug connector with male thread, stainless steel, AI-60115 is suitable for many food and pharmaceutical sterilization processes. It is made entirely of AISI 316L stainless steel (widely used in hygienic and pharmaceutical applications), has no plastic components, and uses Viton seals that resist chemicals and high temperatures. Its operating range (-15Â°C to +225Â°C) and 15 bar working pressure cover common sterilization methods (steam, thermal, many chemical sterilants). Note: Viton has excellent chemical resistance but limited compatibility with some aggressive sterilants (e.g., concentrated peroxide formulations) and high-temperature repeated steam autoclaving may reduce elastomer life. For validated sterilization cycles or regulatory compliance, verify specific sterilant compatibility and perform process validation.

Does the 90Â° angle plug connector with male thread, stainless steel, AI-60115 resist common industrial cleaning agents and solvents?

Yes. The 90Â° angle plug connector with male thread, stainless steel, AI-60115 is highly resistant to common industrial cleaning agents and solvents. Construction entirely from AISI 316L stainless steel provides excellent corrosion resistance to many acids, alkalis and salt solutions, while the absence of plastic components eliminates a common weak point for solvent attack. The use of Viton (FKM) seals further ensures chemical resistance to a broad range of hydrocarbons, ketones, alcohols, oils, and many aggressive cleaning agents over the stated operating temperature range (â15Â°C to +225Â°C). Its suitability for chemical, food, pharmaceutical, electronic and medical applications confirms compatibility with standard industrial cleaning processes. Limitations: Some highly aggressive chemicals (e.g., concentrated hot nitric acid, certain halogenated solvents under specific conditions, or fluorinated compounds at extremes) can attack either stainless steel or Viton; exposure time, concentration, temperature and mechanical stress affect resistance. For critical or unusual solvents/cleaning agents, verify compatibility by consulting chemical compatibility charts for AISI 316L and Viton or perform testing under your exact process conditions.

Coupling push-in angled 90° with a thread external, steel stainless, AI-60115

All products, Push-in fittings/

Additional information

Material	SS – stainless steel

High quality Connection angled 90° with a thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60115. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-60115-04-02	Fitting angled adjustable, hose 4 mm, 1/8" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-04-04	Fitting angled adjustable, hose 4 mm, 1/4" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-04-M5	Fitting angled adjustable, hose 4 mm, M5 male, AISI 316L	-	15	In stock	Enquiry
AI-60115-06-02	Fitting angled adjustable, hose 6 mm, 1/8" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-06-04	Fitting angled adjustable, hose 6 mm, 1/4" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-06-M5	Fitting angled adjustable, hose 6 mm, M5 male, AISI 316L	-	15	In stock	Enquiry
AI-60115-08-02	Fitting angled adjustable, hose 8 mm, 1/8" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-08-04	Fitting angled adjustable, hose 8 mm, 1/4" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-10-04	Fitting angled adjustable, hose 10 mm, 1/4" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-10-06	Fitting angled adjustable, hose 10 mm, 3/8" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-10-08	Fitting angled adjustable, hose 10 mm, 1/2" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-12-06	Fitting angled adjustable, hose 12 mm, 3/8" BSP male, AISI 316L	-	15	In stock	Enquiry
AI-60115-12-08	Fitting angled adjustable, hose 12 mm, 1/2" BSP male, AISI 316L	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High quality Connection angled 90° with a thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60115. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.