Can the Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5 handle 18 bar working pressure with soft plastic hoses without leak when tightened by the nut?

Yes. The Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5 can be used with soft plastic hoses without leaking when the hose is pushed onto the fitting and the nut is properly tightened. The design described.90Â° angled socket coupling with GZ BSPT type C5, nickel-plated brass construction, and nut-tightened hose connection.relies on the nut compressing the hose onto the fitting to create a seal. With correct hose diameter, full insertion, and proper torque on the nut, this arrangement will hold up to the specified working pressure of 18 bar. To ensure leak-free performance: use hoses compatible with the fittingâs barb profile, verify the hose inner diameter matches the fitting, cut the hose squarely, push it fully onto the fitting, and tighten the nut to the manufacturerâs recommended torque. Inspect for leaks after pressurizing and replace any damaged or undersized hose.

Does the Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5 require hose clamps in addition to the nut for secure 18 bar operation?

Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5, described as a 90Â° angled socket coupling for soft-plastic hoses where connection is made by pushing the hose onto the fitting and tightening the nut, and rated for 18 bar, typically requires hose clamps in addition to the nut for secure operation. The nut alone usually compresses the hose onto the barbed fitting, but with soft plastics and at high pressure (18 bar) an additional clamp (worm-drive, crimp or ear clamp) is recommended to prevent blow-off, ensure a reliable seal and meet safety margins. If the manufacturer explicitly states the nut provides an integral clamping feature or supplies a specific clamp type, follow their instructions; otherwise use a suitable hose clamp for 18 bar service.

Is the Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5 compatible with soft plastic hoses of various inner diameters?

Yes. The Twisted coupling for pneumatic hoses angle 90Â° with external thread BSPT, type C5 is compatible with soft plastic hoses of various inner diameters. The product description states itâs designed for connecting hoses made of soft plastics: the hose is pushed onto the fitting and secured by screwing on the nut. Made of nickel-plated brass and rated for a working pressure of 18 bar, it provides a robust, leak-resistant connection for a range of hose inner diameters typical for push-on nut fittings. Ensure you select the coupling size that matches the specific inner diameter of your hose and verify compatibility with the hose wall thickness and material for a reliable seal under your operating pressure.

Twisted coupling for pneumatic hoses angle 90° with external thread BSPT, type C5

All products, Tubular fittings/

Additional information

Material	B – brass (bronze)

90° angled socket coupling with GZ BSPT type C5 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2305001	Angle connector (elbow) C5, hose 6/4, GZ BSPT 1/8	-	16	In stock	Enquiry
MW-2305002	Angle connector (elbow) C5, hose 6/4, GZ BSPT 1/4	-	16	In stock	Enquiry
MW-2305003	Angle connector (elbow) C5, hose 8/6, GZ BSPT 1/8	-	16	In stock	Enquiry
MW-2305004	Angle connector (elbow) C5, hose 8/6, GZ BSPT 1/4	-	16	In stock	Enquiry
MW-2305005	Angle connector (elbow) C5, hose 8/6, GZ BSPT 3/8	-	16	In stock	Enquiry
MW-2305006	Angle connector (elbow) C5, hose 10/8, GZ BSPT 1/4"	-	16	In stock	Enquiry
MW-2305007	Angle connector (elbow) C5, hose 10/8, GZ BSPT 3/8	-	16	In stock	Enquiry
MW-2305008	Angle connector (elbow) C5, hose 10/8, GZ BSPT 1/2"	-	16	In stock	Enquiry
MW-2305009	Angle connector (elbow) C5, hose 12/10, GZ BSPT 3/8	-	16	In stock	Enquiry
MW-2305010	Angle connector (elbow) C5, hose 12/10, GZ BSPT 1/2	-	16	In stock	Enquiry
MW-2305016	Angle connector (elbow) C5, hose 5/3, GZ BSPT 1/8	-	16	In stock	Enquiry
MW-2305017	Angle connector (elbow) C5, hose 15/12.5, GZ BSPT 1/2	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° angled socket coupling with GZ BSPT type C5 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.