Is the Twisted coupling for pneumatic hoses angle 90Â°, type C6 suitable for use with soft-plastic hoses at 18 bar working pressure?

Yes. The Twisted coupling for pneumatic hoses angle 90Â°, type C6 is suitable for use with soft-plastic hoses at 18 bar working pressure. The product description explicitly states it is a 90Â° angled socket coupling type C6 designed for connecting hoses made of soft plastics, with the hose secured by pushing it onto the barb and tightening the nut. It is made of nickel-plated brass and rated for a working pressure of 18 bar, matching your specified pressure. Ensure the hose inner diameter matches the coupling size and that the nut is properly tightened; consider using a hose clamp if additional security is needed for dynamic or high-vibration applications.

Can the Twisted coupling for pneumatic hoses angle 90Â°, type C6 with nickel-plated brass construction be used for soft-plastic hoses at 18 bar?

Yes. The Twisted coupling for pneumatic hoses angle 90Â°, type C6 with nickel-plated brass construction is specified for connecting hoses made of soft plastics and has a working pressure of 18 bar, so it can be used with soft-plastic hoses at 18 bar. Ensure proper hose fit over the tailpiece and fully tighten the nut to achieve a secure, pressure-safe seal; verify compatibility of hose inner diameter and inspect seals/threads for wear before use.

Can the Twisted coupling for pneumatic hoses angle 90Â°, type C6 securely clamp soft-plastic hoses using its screw-on nut at 18 bar?

Yes. the Twisted coupling for pneumatic hoses angle 90Â°, type C6 can securely clamp soft-plastic hoses using its screw-on nut at 18 bar, provided the hose is compatible in diameter and wall strength. The design fits the hose onto the barbed or plain end and relies on the threaded nut to compress and hold it; nickel-plated brass construction supports the mechanical load and pressure. For reliable sealing at 18 bar, ensure: - Correct hose internal diameter match to the coupling tail. - Hose material rated for 18 bar working pressure. - Adequate insertion depth of the hose onto the coupling. - Nut tightened to proper torque (follow manufacturer recommendations). - Use of an additional clamp if hose is very soft, thin-walled, or not specifically rated for push-on screw fittings. If any of these conditions arenât met, add a hose clamp or choose a fitting specifically designed for very soft plastics or higher safety margins.

Screw-together fitting for pneumatic hoses, 90° angled, type C6

All products, Tubular fittings/

Additional information

Material	B – brass (bronze)

Push-on 90° angled coupling, type C6, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2306001	Angled fitting (elbow) C6, hose 6/4 - hose 6/4	-	16	In stock	Enquiry
MW-2306002	Angled fitting (elbow) C6, hose 8/6 - hose 8/6	-	16	In stock	Enquiry
MW-2306003	Angled fitting (elbow) C6, hose 10/8 - hose 10/8	-	16	In stock	Enquiry
MW-2306004	Angled fitting (elbow) C6, hose 12/10 - hose 12/10	-	16	In stock	Enquiry
MW-2306006	Angled fitting (elbow) C6, hose 15/12.5 - hose 15/12.5	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Push-on 90° angled coupling, type C6, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.