Is the Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 suitable for use in wastewater treatment and groundwater drainage at -20Â°C to +50Â°C?

Yes. The Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 is specified for groundwater drainage and wastewater treatment and its operating temperature range is â20Â°C to +50Â°C. Materials and features relevant to these applications: - Body: carbon steel, galvanized . suitable for general industrial and environmental use. - Sealing: NRâSBR rubber . provides elastic sealing within the stated temperature range. - Application listing: explicitly includes groundwater drainage, wastewater treatment, sewage disposal and environmental protection. Caveats: verify chemical compatibility (aggressive chemicals, solvents, high chlorides or extreme pH may affect galvanizing and NRâSBR), pressure ratings, and any local regulations or required certifications for buried or sewage service. If such conditions apply, consult the manufacturerâs detailed datasheet or technical support before installation.

Can Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 be used in agricultural and horticultural irrigation systems?

Yes. Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 is specified for use in agriculture and horticulture, so it is suitable for irrigation systems. Its galvanized carbon steel construction and NRâSBR rubber sealing provide corrosion resistance and reliable sealing for typical irrigation conditions. Operating temperature range (â20Â°C to +50Â°C) covers normal agricultural climates. Ensure compatibility of flow rates, pressures and pipe dimensions in your system and verify chemical compatibility if fertilizers or additives are used.

Does the Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 resist corrosion in marine environments?

The Elbow 90Â° lever connector FERRARI socket/plug, carbon steel, type F.25 offers limited corrosion resistance in marine environments. It is made of carbon steel with galvanization, which provides a protective zinc coating that slows corrosion and protects the base metal against mild to moderate atmospheric and industrial exposure. However, marine environmentsâespecially coastal or offshore locationsâare highly corrosive due to salt (chloride) spray, high humidity, and aggressive atmospheric conditions that accelerate zinc and steel degradation. Practical implications: - Short-term or occasional exposure near marine areas may be acceptable thanks to the galvanized finish. - Continuous or long-term exposure to salt spray, immersion, or highly humid marine conditions will likely lead to accelerated corrosion of the galvanized carbon steel over time. - The NR-SBR rubber seals are not inherently resistant to prolonged saltwater immersion and may deteriorate faster in marine conditions and elevated temperatures. Recommendation: For reliable long-term performance in marine or offshore settings, consider connectors made of more corrosion-resistant materials (e.g., stainless steel or specially coated steels) or additional protective measures (frequent maintenance, sacrificial anodes, thicker/hot-dip galvanizing, or protective coatings).

A 90° elbow of a FERRARI lever coupling socket/plug, steel carbon, type F.25

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

A 90° elbow of a FERRARI lever coupling, terminated with a socket on one side and a coupling plug on the other, type F.25, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-F25-048	Elbow 90° FERRARI 48 mm, socket/plug	-	10	In stock	Enquiry
OM-F25-060	Elbow 90° FERRARI 60 mm, socket/plug	-	10	In stock	Enquiry
OM-F25-080	Elbow 90° FERRARI 80 mm, socket/plug	-	9	In stock	Enquiry
OM-F25-100	Elbow 90° FERRARI 100 mm, socket/plug	-	8	In stock	Enquiry
OM-F25-120	Elbow 90° FERRARI 120 mm, socket/plug	-	7	In stock	Enquiry
OM-F25-150	Elbow 90° FERRARI 150 mm, socket/plug	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A 90° elbow of a FERRARI lever coupling, terminated with a socket on one side and a coupling plug on the other, type F.25, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.