Is the Elbow 90Â° with BSP female thread, stainless steel, type 62510 suitable for continuous use between -20Â°C and +225Â°C at 140 bar?

Yes. The Elbow 90Â° with BSP female thread, stainless steel, type 62510 is specified for an operating temperature range from -20Â°C to +225Â°C and a working pressure of 140 bar, and is made of AISI 316L stainless steel. Based on the provided specifications, it is suitable for continuous use within -20Â°C to +225Â°C at 140 bar, provided the application does not introduce additional factors (corrosive media, cyclic pressure/temperature extremes, mechanical loads, or installation stresses) that could exceed material or design limits. For critical or safetyâcritical systems, verify compatibility with the fluid, applicable standards, and perform applicationâspecific calculations or consult the manufacturer for confirmation.

Can Elbow 90Â° with BSP female thread, stainless steel, type 62510 withstand cyclic pressure spikes up to 140 bar at -20Â°C to +225Â°C?

Elbow 90Â° with BSP female thread, stainless steel, type 62510 - based on the provided data (material AISI 316L, operating temperature â20Â°C to +225Â°C, working pressure 140 bar) the fitting is rated for a static working pressure of 140 bar across the specified temperature range. However, resistance to cyclic pressure spikes depends on fatigue strength, spike magnitude, frequency, duration and system dynamics; these are not specified. AISI 316L can perform well in this temperature range, but repeated spikes to 140 bar or above may induce fatigue or stress concentrations at threads and bends. For safe use with cyclic spikes, consult the manufacturer for dynamic pressure ratings, fatigue life data and applicable standards, and consider pressure testing, transient analysis and appropriate safety margins.

Does Elbow 90Â° with BSP female thread, stainless steel, type 62510 require special torque settings for 140 bar at -20Â°C to +225Â°C?

Based on the provided description, Elbow 90Â° with BSP female thread, stainless steel, type 62510 (material AISI 316L) rated for operation from â20Â°C to +225Â°C and working pressure 140 bar does not itself specify special torque settings. However, safe and reliable assembly depends on the mating thread, gasket/seal type, and application. General guidance: - Use the manufacturerâs torque recommendations if available for type 62510; if none are supplied, follow standard torque values for BSP female threads in stainless steel of the appropriate size and thread class. - For AISI 316L components at the stated pressure and temperature range, avoid overâtorquing (risking thread damage or galling) and underâtorquing (risking leaks). Use lubrication or an appropriate antiâseize for stainless threads to reduce galling. - If a seal (PTFE, Oâring, metal seal) is used, follow the seal manufacturerâs compression/torque guidance to ensure proper sealing across â20Â°C to +225Â°C. - For critical, highâpressure or safetyâsensitive systems, perform a torque verification and pressure test after assembly, and consult system design or the component supplier for exact torque values. Summary: Elbow 90Â° with BSP female thread, stainless steel, type 62510 does not inherently require a unique special torque setting beyond standard BSP thread torque practices and any specific recommendations from the seal or component manufacturer; follow manufacturer guidance, use antiâgalling measures for 316L, and validate assembly with testing.

90° elbow with BSP female thread, stainless steel, type 62510

All products, Threaded pneumatic fittings/

Additional information

Material	SS – stainless steel

90° elbow made of stainless steel, type 62510, with BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-62510-02	Elbow 90° 1/8" BSP female, AISI 316L	-	140	In stock	Enquiry
AI-62510-04	Elbow 90° 1/4" BSP female, AISI 316L	-	140	In stock	Enquiry
AI-62510-06	Elbow 90° 3/8" BSP female, AISI 316L	-	140	In stock	Enquiry
AI-62510-08	Elbow 90° 1/2" BSP female, AISI 316L	-	140	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° elbow made of stainless steel, type 62510, with BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.