Is the 90Â° elbow with BSP female thread, stainless steel, type VT101 suitable for continuous use at 10 bar in industrial piping applications?

Yes . the 90Â° elbow with BSP female thread, stainless steel, type VT101 is suitable for continuous use at 10 bar in industrial piping applications, based on the provided description. The component is specified as made from AISI 316 stainless steel and its working pressure is stated as 10 bar, which means it is rated to handle that pressure under normal operating conditions. Caveats to verify before installation: - Ensure system temperature, media (corrosivity, abrasiveness) and cyclic loading are within AISI 316 limits and the manufacturerâs detailed specifications. - Confirm thread compatibility and correct sealing method for BSP female threads to avoid leaks. - Follow installation torque and support/bracing recommendations to prevent mechanical stress on the fitting. - Check applicable standards, safety factors and any required certifications for your specific industrial application. If all operational conditions and installation practices meet these checks, the VT101 can be used continuously at 10 bar.

Can the 90Â° elbow with BSP female thread, stainless steel, type VT101 withstand corrosive industrial environments at 10 bar?

Yes. The 90Â° elbow with BSP female thread, stainless steel, type VT101 is made from AISI 316 (316 stainless steel), which offers good resistance to many corrosive industrial environments, including chlorides and moderate acidic/alkaline media. With a specified working pressure of 10 bar, it is designed to operate safely at that pressure when installed and maintained correctly. However, suitability depends on specific process conditions - temperature, concentration of aggressive chemicals (particularly strong chlorides, HCl, H2S, or highly oxidizing agents), crevice or pitting risk, and exposure duration. For highly aggressive or specialized environments, confirm compatibility with material chemical resistance data, consider duplex/superduplex or more resistant alloys, and consult manufacturer or corrosion specialist for final approval.

Does the 90Â° elbow with BSP female thread, stainless steel, type VT101 require special installation for 10 bar systems?

No. The 90Â° elbow with BSP female thread, stainless steel, type VT101 does not require any special installation procedures for systems operating at 10 bar beyond standard best practices for threaded stainless-steel fittings. It is specified for a working pressure of 10 bar and made from AISI 316, so when installed correctly it is suitable for that pressure. Recommended standard installation steps: - Inspect threads and mating components for damage, debris or burrs. - Use an appropriate thread sealant (PTFE tape or compatible pipe dope) rated for your fluid and temperature to ensure leak-tightness. - Hand-start the connection to avoid cross-threading, then tighten with a suitable wrench to a proper torqueâdo not over-tighten, which can damage threads or distort the fitting. - Ensure alignment of the piping to avoid undue stress on the fitting; support pipes to prevent strain. - After installation, pressure-test the system according to your site procedures and applicable standards to verify leak-tightness at operating pressure. If the system involves aggressive chemicals, high temperatures, or regulatory requirements, verify chemical compatibility of sealants and consult applicable codes. Otherwise, normal threaded fitting installation practices are sufficient for the 90Â° elbow with BSP female thread, stainless steel, type VT101 at 10 bar.

Elbow 90° with a thread internal BSP, steel stainless, type VT101

Additional information

Material	SS – stainless steel

Elbow 90° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NM-VT101-04	Elbow 90° with 1/4" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-06	Elbow 90° with 3/8" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-08	Elbow 90° with 1/2" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-12	Elbow 90° with 3/4" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-16	Elbow 90° with 1" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-20	Elbow 90° with 1.1/4" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-24	Elbow 90° with 1.1/2" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-32	Elbow 90° with 2" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-40	Elbow 90° with 2.1/2" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-48	Elbow 90° with 3" BSP female, AISI 316	-	10	In stock	Enquiry
NM-VT101-64	Elbow 90° with 4" BSP female, AISI 316	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Elbow 90° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.