Is the BSPT male threaded nipple, stainless steel, type VT116 compatible with other BSPT fittings and rated for 10 bar working pressure?

Yes. The BSPT male threaded nipple, stainless steel, type VT116 is compatible with other BSPT fittings (it has external BSPT threads on both ends) and is rated for a working pressure of 10 bar. Made of AISI 316 stainless steel, it is intended for piping connections in industrial installations. Note that the provided dimensions are indicative and may vary slightly by manufacturer, so verify exact sizes and tolerances before final assembly.

Can BSPT male threaded nipple, stainless steel, type VT116 be used in high-temperature applications up to 10 bar?

Yes - BSPT male threaded nipple, stainless steel, type VT116 can be used up to 10 bar, since its listed working pressure is 10 bar and it is made of AISI 316 stainless steel, which has good highâtemperature strength and corrosion resistance. However, suitability at elevated temperatures depends on the exact temperature: AISI 316 retains strength up to several hundred Â°C, but the pressure rating can change with temperature and manufacturer tolerances. Also confirm joint type, seal material, and exact operating temperature with the manufacturer to ensure safe use.

Does BSPT male threaded nipple, stainless steel, type VT116 require sealing tape or compound for leak-free 10 bar connections?

Yes. BSPT male threaded nipple, stainless steel, type VT116 requires thread sealing (tape or compound) for reliable, leak-free connections at 10 bar. Why: BSPT (British Standard Pipe Taper) is a tapered thread form that seals by the interference of mating tapered threads, but in practice metalâtoâmetal contact alone is often insufficient to guarantee a consistently leakâtight joint at higher pressures or with stainless steel fittings. Thread sealant. PTFE tape (thread sealing tape) or an appropriate anaerobic/sealing compound. fills thread gaps, compensates for machining tolerances, and prevents galling or microâleakage in AISI 316 components. Recommendations: - Use PTFE tape rated for pressure, wrapped 2â4 turns clockwise on the male thread, avoid overfilling. - Or use a compatible thread sealant/pipe joint compound suitable for stainless steel and the media/service temperature and chemical compatibility. - Assemble to the manufacturerâs torque/installation guidance to avoid overstressing threads. - For critical services or where disassembly is frequent, choose a sealant that permits reuse or plan for reapplication. In short: apply an appropriate tape or compound when installing BSPT male threaded nipple, stainless steel, type VT116 to ensure leakâfree performance at 10 bar.

BSPT male threaded nipple, stainless steel, type VT116

Additional information

Material	SS – stainless steel

Adapter nipple with external BSPT threads on both sides for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
NM-VT116-04	1/4" BSPT nipple, AISI 316	-	10
NM-VT116-06	3/8" BSPT nipple, AISI 316	-	10
NM-VT116-08	Half-inch BSPT nipple, AISI 316	-	10
NM-VT116-12	3/4" BSPT nipple, AISI 316	-	10
NM-VT116-16	1" BSPT nipple, AISI 316	-	10
NM-VT116-20	Nipple with GZ 1.1/4" BSPT, AISI 316	-	10
NM-VT116-24	Nipple with GZ 1.1/2" BSPT, AISI 316	-	10
NM-VT116-32	2" BSPT nipple, AISI 316	-	10
NM-VT116-40	Nipple with GZ 2.1/2" BSPT, AISI 316	-	10
NM-VT116-48	3" BSPT nipple, AISI 316	-	10
NM-VT116-64	4" BSPT nipple, AISI 316	-	10

Adapter nipple with external BSPT threads on both sides for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.