Is the 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® suitable for use at 3 bar and up to +76Â°C?

Yes. The 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® is specified for a working pressure up to 3 bar and an operating temperature up to +76Â°C, so it is suitable for use at 3 bar and temperatures up to +76Â°C. Ensure actual application conditions (fluid type, continuous exposure, pressure spikes, and chemical compatibility) match the acetal material limits and consider safety margins for peak pressures or higher temperatures.

Can the 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® be cleaned with common solvents without damaging acetal?

Yes - the 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® is made of acetal (POM), which is generally resistant to many common solvents such as water-based coolants, light oils, and mild detergents. Avoid strong oxidizing acids, strong alkalis, and aggressive chlorinated or ketone solvents (e.g., methylene chloride, acetone) which can attack acetal and cause swelling, cracking, or loss of mechanical properties. Also keep operating temperature below +76Â°C and working pressure under 3 bar during and after cleaning. For safe cleaning, use mild aqueous cleaners or isopropyl alcohol in short exposure; rinse thoroughly and allow to dry.

Does the 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® fit standard 1/4" coolant tubing?

Yes. The 90Â° flat nozzle with holes for coolant, 1/4" system, LOC-LINEÂ® is designed for the LOC-LINEÂ® 1/4" coolant tubing system, so it fits standard 1/4" LOC-LINEÂ® coolant hoses. Made of acetal with six 2.5 mm holes, it is suitable for working pressures up to 3 bar and temperatures up to +76Â°C.

90° flat nozzle with holes for coolant, 1/4″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

90° flat nozzle with holes for LOC-LINE® coolant hoses – 1/4″ system. 6 holes with a diameter of 2.5 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-49442	90° flat nozzle with holes 6x2.5 mm (1/4" system)	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° flat nozzle with holes for LOC-LINE® coolant hoses – 1/4″ system. 6 holes with a diameter of 2.5 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.