Is the Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass suitable for use with steam at 200Â°C and 25 bar?

Yes. The Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass is suitable for steam at 200Â°C and 25 bar. The product specification explicitly lists steam among the compatible media, and the operating limits state a temperature range up to +200Â°C and a working pressure of 25 bar, which match your stated conditions. Note that proper installation, compatible mating fittings, and routine inspection for steam service (corrosion, wear, seal integrity) are recommended to ensure safe, long-term operation.

Can the Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass be used for hot oil applications up to 200Â°C?

Yes. The Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass is specified for operating temperatures from -20Â°C to +200Â°C and explicitly lists hot oil as an application. With a 6 mm flow diameter, brass construction and 25 bar working pressure, it is suitable for hot oil up to 200Â°C when installed and used within those pressure and temperature limits. Ensure compatibility with your specific oil type and installation (seals, thread sealing, thermal expansion) and follow manufacturer installation and maintenance guidelines.

Can the Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass be used for circulating potable water in cleaning machines?

Yes. the Plug 90Â° DN 6 quick connector with male thread, TST 060 series, brass can be used for circulating potable water in cleaning machines, with caveats. Reasons it is suitable: - Materials and media: The description explicitly lists âcan be used for water in cleaning machines,â and the brass construction is common for potable-water fittings. - Pressure/temperature: Flow diameter 6 mm, working pressure 25 bar and temperature range â20Â°C to +200Â°C cover typical cleaning-machine conditions. - Sealing/design: External tapered BSPT/metric thread with 60Â° cone sealing (no valve) is a standard mechanical connection; ensure compatibility with the mating connector to maintain a reliable, leak-free seal. Caveats and recommendations: - Potable-water suitability: Confirm the brass alloy and any internal coatings or finishes meet local drinking-water regulations (e.g., NSF/ANSI 61, EU limits on lead) if water will be consumed or requires certification. - Compatibility: Verify the mating coupling thread type and cone angle match to avoid leaks and ensure proper sealing. - Hygiene/cleaning: For food or medical applications, confirm the surface finish and cleanability meet hygiene standards. - Corrosion and dezincification: If water is aggressive (low pH or high chloride), consider dezincification-resistant brass (DZR/lorenz) or alternative materials. - Installation: Use appropriate thread sealing compatible with potable systems and avoid thread sealants that are not potable-safe. Conclusion: Functionally suitable for circulating potable water in cleaning machines, provided the brass alloy and sealing/installation meet applicable potable-water and hygiene regulations.

Plug 90° DN 6 quick connector with male thread, TST 060 series, brass

Additional information

Material	B – brass (bronze)

90° plug DN 6 quick coupling with external tapered BSPT and metric thread (sealing on 60° cone), without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FW-060-EUM10-90	90° plug DN 6 with GZ M10x1, without valve	-	25	In stock	Enquiry
FW-060-EUM14-90	90° plug DN 6 with GZ M14x1.5, without valve	-	25	In stock	Enquiry
FW-060-EUM8-90	90° plug DN 6 with GZ M8x0.75, without valve	-	25	In stock	Enquiry
FW-060-RU10-90	90° plug DN 6 with GZ 1/8" BSPT, without valve	-	25	In stock	Enquiry
FW-060-RU13-90	90° plug DN 6 with GZ 1/4" BSPT, without valve	-	25	In stock	Enquiry
FW-060-RU17-90	90° plug DN 6 with GZ 3/8" BSPT, without valve	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° plug DN 6 quick coupling with external tapered BSPT and metric thread (sealing on 60° cone), without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C. Material: brass.