Is the 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 suitable for use with medical gases and chemical analyzers at up to 8.3 bar?

Yes. The 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 is specified for use in gas detection, medical devices, and chemical analyzers, and its technical data support such applications: material acetal with NBR Oâring, audible click confirmation of a secure connection, working pressure up to 8.3 bar, and operating temperature range â40Â°C to +82Â°C. These features indicate suitability for medical gases and chemical analyzer use at pressures up to 8.3 bar, provided compatibility of acetal and NBR with the specific gases and chemicals involved and compliance with any applicable medical/industry standards or sterility/cleanliness requirements.

Can the 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 be used in inkjet printing and optical device equipment at -40Â°C to +82Â°C?

Yes. The 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 is specified for use in inkjet printing and optical device equipment and its operating temperature range is â40Â°C to +82Â°C. Material (acetal with NBR Oâring), working pressure up to 8.3 bar, and the audible click connection indicate suitability for those applications within that temperature range. Ensure chemical compatibility with your specific inks/fluids and validate performance under your systemâs pressure, cycle frequency and contamination conditions before final deployment.

Can the 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 be autoclaved or sterilized for medical device use?

Based on the provided description, the 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 is made of acetal with an NBR O-ring, has an operating temperature range of â40Â°C to +82Â°C, and is intended for applications including medical devices. However, autoclaving/steam sterilization typically involves temperatures of about 121Â°C (or higher for some cycles) and saturated steam under pressure. Acetal (POM) has a maximum continuous use temperature well below autoclave temperatures and will deform, lose mechanical strength, or hydrolyze under prolonged highâtemperature steam exposure. NBR Oârings also degrade, harden, or lose sealing properties when exposed to steam sterilization temperatures and humid heat. The stated working temperature limit (+82Â°C) is far below standard autoclave temperatures. Therefore, the 90Â° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2 should not be autoclaved or sterilized using standard steam autoclave cycles. For medical device sterilization, consider alternative sterilization methods validated for these materials (e.g., lowâtemperature methods like ethylene oxide or hydrogen peroxide plasma) only after manufacturer confirmation and validated compatibility. For definitive approval in a specific medical application, obtain material/sterilization compatibility data and written confirmation from the manufacturer or perform validated sterilization and biocompatibility testing per applicable standards.

90° quick connect hose plug with nut and valve, acetal, PMC series DN 3.2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

90° quick coupling plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] – total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-PMV-37-AC	90° PMC DN3.2 plug for hose 6.4x4.3 with nut, with valve, acetal	3	8.3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° quick coupling plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] – total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.