Is the 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 compatible with both metric and BSP threads and safe for 15 bar cooling liquid use?

Yes. The 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 is available with either metric or BSP external threads, and it is specified for cooling liquids with a working pressure of 15 bar. Made of brass and designed for cooling liquids in plastic processing (as well as compressed air, gas cylinders and other technical uses), it is suitable and rated for 15 bar cooling liquid service when used according to manufacturer guidelines.

Can the 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 be used with compressed air and gas cylinders at 15 bar?

Yes. The 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 is specified for use with cooling liquids, compressed air installations, gas cylinders and other technical fields. Made of brass and rated for a working pressure of 15 bar, it can be used with compressed air and gas cylinders at 15 bar. Ensure correct thread type (metric or BSP) and proper installation; follow applicable safety standards for gas use.

Does the 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 require specific installation torque for its external metric or BSP threads?

No. The 90Â° quick connect plug for injection molds with GZ without valve, DYROS series 80 with external metric or BSP threads does not require a special installation torque beyond standard good-practice tightening for brass fittings and the specific thread type used. Use appropriate hand or wrench tightening sufficient to obtain a leak-free seal without overâtorquing, which can damage brass threads. For sealing, apply suitable thread sealant: use PTFE tape or an appropriate liquid thread sealant for BSP or metric pipe threads as applicable. Ensure threads are clean and engage properly; tighten until snug and then apply an additional fraction of a turn (commonly 1/4â1/2 turn) with a wrench for metalâtoâmetal or taped connections. If connecting to components with manufacturer torque specifications, follow those values. Always pressureâtest the assembly to 15 bar maximum working pressure to verify there are no leaks.

90° quick connect plug for injection molds with GZ without valve, DYROS series 80

Additional information

Material	B – brass (bronze)

90° quick coupling plug DYROS series 80 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-VN812	90° plug DN 13 with GZ 1/2", without valve	-	15	In stock	Enquiry
DY-VN824	90° plug DN 13 with GZ M24x1.5, without valve	-	15	In stock	Enquiry
DY-VN834	90° plug DN 13 with GZ 3/4", without valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° quick coupling plug DYROS series 80 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.