Is the Adaptor - nipple GZ BSP, carbon steel, type A101 compatible with my BSP female port using 60Â° cone sealing and what torque is recommended for proper sealing?

Yes. The Adaptor - nipple GZ BSP, carbon steel, type A101 is designed with external BSP threads and a 60Â° cone sealing face, so it is compatible with a BSP female port that uses a 60Â° cone sealing surface. For proper sealing, assemble with appropriate thread engagement and tighten to the recommended torque for the thread size and material. Typical torque guidelines for carbon steel BSP (male 60Â° cone) to female ports are approximately: - G1/8 (BSPP): 10â15 Nm - G1/4 (BSPP): 15â25 Nm - G3/8 (BSPP): 25â35 Nm - G1/2 (BSPP): 35â50 Nm - G3/4 (BSPP): 50â70 Nm - G1 (BSPP): 70â100 Nm Use a calibrated torque wrench, ensure mating surfaces are clean and undamaged, and apply thread sealant or anti-seize only if specified for the system (cone seals usually do not require additional sealant on the cone face). If available, follow the manufacturerâs exact torque chart for type A101 and the specific thread size for safest and best results.

Can Adaptor - nipple GZ BSP, carbon steel, type A101 be used in high-pressure systems and what are its maximum pressure limits?

Adaptor - nipple GZ BSP, carbon steel, type A101 is designed for high-pressure hydraulic systems using external BSP threads with 60Â° cone sealing. Made of galvanized carbon steel, it is suitable for high-pressure applications, but the exact maximum pressure limit depends on specific size, thread variant and system standards (e.g., ISO/EN or SAE ratings) and must be verified against manufacturer data or pressure ratings for the specific fitting size. In absence of manufacturer-specified ratings, consult product datasheet or supplier for maximum working pressure and safety factors before use in high-pressure systems.

How should I install Adaptor - nipple GZ BSP, carbon steel, type A101 to ensure proper 60Â° cone sealing without damaging threads?

To ensure proper 60Â° cone sealing of the Adaptor - nipple GZ BSP, carbon steel, type A101 without damaging threads, follow these steps: 1. Inspect components - Check adaptor cone and mating female seat for burrs, nicks, corrosion or deformation. Clean both parts; remove dirt, oil, and galvanizing residues. - Verify threads are undamaged and match BSP pitch and diameter. 2. Prepare threads correctly - Do not use pipe dope or thread sealants on the 60Â° cone sealing surface. Use a light film of appropriate anti-seize or assembly lubricant only on external threads if recommended by manufacturer to prevent galling; avoid lubricant on the cone face. - Do not apply PTFE tape to the cone sealing area; if tape is used on the thread portion, wrap lightly and stop before reaching the cone shoulder. 3. Align and start by hand - Align adaptor squarely with the female port. Engage threads carefully by hand to ensure correct start and avoid cross-threading. Hand-tighten until you feel resistance from the cone beginning to contact the seat. 4. Seat the 60Â° cone - Continue tightening gradually with a suitable spanner on the hex flats; maintain axial alignment. Tighten until the cone fully seats against the female 60Â° seat. Do not exert excessive force beyond manufacturerâs recommended torqueâover-tightening can deform the cone and seating surface and damage threads. 5. Apply correct torque - If torque data is available for type A101 or the specific thread size, use a calibrated torque wrench and tighten to the specified value. If no data, tighten one additional wrench flat turn or the commonly recommended 1/6â1/4 turn after hand-tight engagement, but stay conservative to avoid damage. 6. Final checks - Inspect the external threads and cone face for signs of damage. Perform a pressure test at the systemâs working pressure (or per safety guidelines) to confirm no leakage. Re-torque after initial pressurization if manufacturer advises. 7. Maintenance and replacement - If sealing leaks persist, disassemble and inspect mating seat and cone for damage. Replace the adaptor if cone or threads are distorted or plating is compromised. Following these precautions preserves thread integrity and ensures a reliable 60Â° cone seal for the Adaptor - nipple GZ BSP, carbon steel, type A101.

Adaptor – nipple GZ BSP, carbon steel, type A101

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure hydraulic adapter, type A101, with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A101-02-02	Adaptor GZ BSP 1/8" / GZ BSP 1/8"	-	400	In stock	Enquiry
TI-A101-02-04	Adapter GZ BSP 1/8" / GZ BSP 1/4"	-	400	In stock	Enquiry
TI-A101-02-06	Adapter GZ BSP 1/8" / GZ BSP 3/8"	-	400	In stock	Enquiry
TI-A101-02-08	Adapter GZ BSP 1/8" / GZ BSP 1/2"	-	350	In stock	Enquiry
TI-A101-04-04	Adaptor GZ BSP 1/4" / GZ BSP 1/4"	-	400	In stock	Enquiry
TI-A101-04-06	Adaptor GZ BSP 1/4" / GZ BSP 3/8"	-	400	In stock	Enquiry
TI-A101-04-08	Adaptor GZ BSP 1/4" / GZ BSP 1/2"	-	350	In stock	Enquiry
TI-A101-04-10	Adaptor GZ BSP 1/4" / GZ BSP 5/8"	-	350	In stock	Enquiry
TI-A101-04-12	Adaptor GZ BSP 1/4" / GZ BSP 3/4"	-	315	In stock	Enquiry
TI-A101-04-16	Adaptor GZ BSP 1/4" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-06-06	Adapter GZ BSP 3/8" / GZ BSP 3/8"	-	400	In stock	Enquiry
TI-A101-06-08	Adapter GZ BSP 3/8" / GZ BSP 1/2"	-	350	In stock	Enquiry
TI-A101-06-10	Adapter GZ BSP 3/8" / GZ BSP 5/8"	-	350	In stock	Enquiry
TI-A101-06-12	Adapter GZ BSP 3/8" / GZ BSP 3/4"	-	315	In stock	Enquiry
TI-A101-06-16	Adapter GZ BSP 3/8" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-08-08	Adaptor GZ BSP 1/2" / GZ BSP 1/2"	-	350	In stock	Enquiry
TI-A101-08-10	Adapter GZ BSP 1/2" / GZ BSP 5/8"	-	350	In stock	Enquiry
TI-A101-08-12	Adapter GZ BSP 1/2" / GZ BSP 3/4"	-	315	In stock	Enquiry
TI-A101-08-16	Adapter GZ BSP 1/2" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-08-20	Adaptor GZ BSP 1/2" / GZ BSP 1.1/4"	-	200	In stock	Enquiry
TI-A101-08-24	Adaptor GZ BSP 1/2" / GZ BSP 1.1/2"	-	160	In stock	Enquiry
TI-A101-10-10	Adapter GZ BSP 5/8" / GZ BSP 5/8"	-	350	In stock	Enquiry
TI-A101-10-12	Adapter GZ BSP 5/8" / GZ BSP 3/4"	-	315	In stock	Enquiry
TI-A101-10-16	Adapter GZ BSP 5/8" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-12-12	Adaptor GZ BSP 3/4" / GZ BSP 3/4"	-	315	In stock	Enquiry
TI-A101-12-16	Adapter GZ BSP 3/4" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-12-20	Adapter GZ BSP 3/4" / GZ BSP 1.1/4"	-	200	In stock	Enquiry
TI-A101-12-24	Adapter GZ BSP 3/4" / GZ BSP 1.1/2"	-	160	In stock	Enquiry
TI-A101-16-16	Adaptor GZ BSP 1" / GZ BSP 1"	-	250	In stock	Enquiry
TI-A101-16-20	Adapter GZ BSP 1" / GZ BSP 1.1/4"	-	200	In stock	Enquiry
TI-A101-16-24	Adaptor GZ BSP 1" / GZ BSP 1.1/2"	-	160	In stock	Enquiry
TI-A101-16-32	Adaptor GZ BSP 1" / GZ BSP 2"	-	125	In stock	Enquiry
TI-A101-20-20	Adaptor GZ BSP 1.1/4" / GZ BSP 1.1/4"	-	200	In stock	Enquiry
TI-A101-20-24	Adaptor GZ BSP 1.1/4" / GZ BSP 1.1/2"	-	160	In stock	Enquiry
TI-A101-20-32	Adaptor GZ BSP 1.1/4" / GZ BSP 2"	-	125	In stock	Enquiry
TI-A101-24-24	Adaptor GZ BSP 1.1/2" / GZ BSP 1.1/2"	-	160	In stock	Enquiry
TI-A101-24-32	Adaptor GZ BSP 1.1/2" / GZ BSP 2"	-	125	In stock	Enquiry
TI-A101-32-32	Adaptor GZ BSP 2" / GZ BSP 2"	-	125	In stock	Enquiry
TI-A101-32-40	Adaptor GZ BSP 2" / GZ BSP 2.1/2"	-		In stock	Enquiry
TI-A101-32-48	Adaptor GZ BSP 2" / GZ BSP 3"	-		In stock	Enquiry
TI-A101-40-40	Adaptor GZ BSP 2.1/2" / GZ BSP 2.1/2"	-		In stock	Enquiry
TI-A101-40-48	Adaptor GZ BSP 2.1/2" / GZ BSP 3"	-		In stock	Enquiry
TI-A101-48-48	Adaptor GZ BSP 3" / GZ BSP 3"	-		In stock	Enquiry