What is the maximum operating pressure for the Adaptor - plug with GW BSP, stainless steel, type A112A made from AISI 316L?

The maximum operating pressure for the Adaptor - plug with GW BSP, stainless steel, type A112A (material AISI 316L) depends on several factors: nominal size (thread diameter), thread standard (BSP parallel), wall thickness of the plug body, temperature, and specific pressure ratings defined by the manufacturer or applicable standards. The product description provided (Adaptor - high-pressure plug type A112A with internal BSP thread, with hexagonal head. Material: AISI 316L steel.) does not specify a numeric pressure rating, so a definitive maximum operating pressure cannot be determined from that information alone. Typical guidance: - AISI 316L stainless steel has good strength and corrosion resistance; small, compact BSP threaded plugs in 316L are commonly rated for pressures from several hundred bar down to lower values depending on size and design. - For safe use, consult the manufacturerâs datasheet or pressure-rating chart for type A112A plugs, or use engineering calculations (thread engagement, tensile and yield strengths of 316L at operating temperature) and applicable standards (e.g., EN, ISO) to establish a maximum working pressure. - If the application is safety-critical, obtain the exact maximum operating pressure and certification from the supplier before installation.

How do I install the Adaptor - plug with GW BSP, stainless steel, type A112A to ensure a leak-free connection?

To install the Adaptor - plug with GW BSP, stainless steel, type A112A and ensure a leak-free connection, follow these steps: 1. Inspect threads and sealing surfaces for damage or debris; clean with a lint-free cloth. 2. Verify thread type and size match the mating component (internal BSP on adaptor to external BSP male). 3. Apply appropriate thread sealant: for metal BSP fittings use PTFE tape (wrap clockwise 2â3 turns starting at the first thread, avoid tape entering bore) or a liquid anaerobic thread sealant compatible with AISI 316L and system media. Do not use pipe dope that can contaminate system if incompatible. 4. Hand-start the Adaptor - plug with GW BSP, stainless steel, type A112A to avoid cross-threading. 5. Tighten using a wrench on the hexagonal head: first hand-tight, then wrench-tighten to manufacturerâs recommended torque if available; otherwise tighten until snug plus 1â2 full turns, avoiding over-torquing. 6. Pressurize slowly and inspect for leaks; if leak persists, depressurize, retighten slightly or reapply sealant and reinstall. Follow system pressure ratings and safety procedures.

Does the Adaptor - plug with GW BSP, stainless steel, type A112A resist corrosion in seawater environments?

Adaptor - plug with GW BSP, stainless steel, type A112A: AISI 316L stainless steel offers very good corrosion resistance in many aggressive environments, w tym wody morskiej, dziÄki zawartoÅci molibdenu i niskiej zawartoÅci wÄgla, co zmniejsza ryzyko korozji miÄdzykrystalicznej. Jednak rzeczywista odpornoÅÄ na korozjÄ w Årodowisku morskim zaleÅ¼y od kilku czynnikÃ³w: stÄÅ¼enia soli, temperatury, obecnoÅci osadÃ³w lub zanieczyszczeÅ, natlenienia wody, czasu ekspozycji oraz mechanicznego Åcierania i naprÄÅ¼eÅ. W praktyce AISI 316L dobrze sprawdza siÄ w sÅonej wodzie przy zastosowaniach ogÃ³lnych i przy braku silnie korodujÄcych czynnikÃ³w. DoÅwiadczenia pokazujÄ, Å¼e w warunkach staÅej ekspozycji wody morskiej powierzchnia moÅ¼e byÄ naraÅ¼ona na biologiczne osady i lokalne formy korozji (np. punktowa lub szczelinowa), zwÅaszcza w stagnujÄcych strefach lub tam, gdzie wystÄpuje naprÄÅ¼enie lub uszkodzenia powÅoki. Podsumowanie: Adaptor - plug with GW BSP, stainless steel, type A112A wykonany z AISI 316L wykazuje dobrÄ odpornoÅÄ na korozjÄ w Årodowisku morskim, ale dla krytycznych zastosowaÅ morskich (dÅugotrwaÅa ekspozycja, wysokie temperatury, agresywne warunki, konstrukcje pod naprÄÅ¼eniem) zaleca siÄ dodatkowÄ ocenÄ (analiza warunkÃ³w pracy, ewentualne powÅoki ochronne, regularna konserwacja) lub rozwaÅ¼enie bardziej odpornych materiaÅÃ³w (np. duplex, super-austenityczne czy tytan) w zaleÅ¼noÅci od wymagaÅ.

Adapter – plug with BSP female, stainless steel, type A112A

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel
Standard length [m]	25, 30

Adapter – plug high-pressure type A112A with BSP female thread, with a hexagon head. Material: AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A112A-04-SS	Cap 1/4" BSP female, AISI 316	-	350	In stock	Enquiry
TI-A112A-06-SS	Cap 3/8" BSP female, AISI 316	-	250	In stock	Enquiry
TI-A112A-08-SS	Cap 1/2" BSP female, AISI 316	-	225	In stock	Enquiry
TI-A112A-12-SS	Cap 3/4" BSP female, AISI 316	-	200	In stock	Enquiry
TI-A112A-16-SS	Cap 1" BSP female, AISI 316	-	160	In stock	Enquiry
TI-A112A-20-SS	Cap 1.1/4" BSP female, AISI 316	-	160	In stock	Enquiry
TI-A112A-24-SS	Cap 1.1/2" BSP female, AISI 316	-	160	In stock	Enquiry
TI-A112A-32-SS	Cap 2" BSP female, AISI 316	-	100	In stock	Enquiry