Can the Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 be used with both O-ring and metal gasket seals in the SAE 6000 flange groove?

Yes. The Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 is designed for dual sealing in the SAE 6000 flange groove. The adaptor uses an external BSP thread with 60Â° cone sealing for the thread end and the SAE 6000 flange on the other end accepts either an O-ring or a metal gasket placed in the flange groove. Material is carbon steel, galvanized, and the product description explicitly states "O-ring sealing or other gasket in the flange groove," confirming compatibility with both O-ring and metal gasket seals. Ensure you select the correct size and gasket material to meet pressure, temperature and media requirements and follow proper installation torque and surface finish specifications for reliable sealing.

Is the Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 compatible with different O-ring materials for varied fluids and temperatures?

Yes. The Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 accepts an O-ring in the SAE 6000 flange groove, so it can be used with different O-ring materials to suit varied fluids and temperature ranges-provided the chosen elastomer is compatible with the fluid and the operating temperature/pressure. Carbon steel body (galvanized) is mechanically suitable, but chemical compatibility between fluid and both the O-ring material and the zinc coating must be verified. Select O-ring compounds (e.g., NBR, FKM, EPDM, HNBR, PTFE) based on fluid type and temperature limits, and ensure sealing pressure and groove dimensions meet the manufacturerâs specifications.

Does the Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 require specific torque values for proper flange sealing?

Yes. The Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 requires specific torque considerations to ensure proper flange sealing: - Sealing types: the SAE 6000 flange on this adaptor uses either an Oâring or another gasket in the flange groove. Correct compression of that sealing element is essential; underâ or overâtorque can cause leaks or damage (Oâring extrusion/cutting or gasket crushing). - Bolt torque: tighten flange bolts progressively and evenly in a crisscross pattern to the manufacturerâs recommended torque for the bolt size, grade, and flange material. If the equipment/installation documentation provides explicit torque values for SAE 6000 flanges and the specific bolt grade, use those values. If not provided, use standard torque charts for the bolt diameter and material while targeting the correct gasket compression for Oâring/gasket type. - Torque control: use calibrated torque tools and perform final torque checks after initial pressure cycling (if possible) because gasket relaxation and seating can reduce bolt load. - Additional notes: apply correct lubricant/antiâseize (per spec) to threads if recommendedâthis affects required torque. Do not rely solely on feel; incorrect torque risks leaks or flange damage. In summary: the Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119 does require appropriate, specified torque practice for reliable flange sealingâfollow manufacturer torque specs for bolt size/grade and use progressive, even tightening with torque verification.

Adaptor with GZ BSP/flange SAE 6000, carbon steel, type A119

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adaptor type A119 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A119-08	SAE 6000 flange adapter 1/2" / 1/2" BSP	-	350	In stock	Enquiry
TI-A119-12	SAE 6000 flange adapter 3/4" / 3/4" BSP	-	315	In stock	Enquiry
TI-A119-16	SAE 6000 flange adapter 1" / 1" BSP	-	250	In stock	Enquiry
TI-A119-20	SAE 6000 flange adapter 1.1/4" / 1.1/4" BSP	-	200	In stock	Enquiry
TI-A119-24	SAE 6000 flange adapter 1.1/2" / 1.1/2" BSP	-	160	In stock	Enquiry
TI-A119-32	SAE 6000 flange adapter 2" / 2" BSP	-	125	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure adaptor type A119 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.