Is the Adaptor with GZ BSP, stainless steel, type A101 compatible with my high-pressure system using a 60Â° cone BSP female fitting and AISI 316L media?

Yes . Adaptor with GZ BSP, stainless steel, type A101 is compatible with your system. Why: - The adaptor description: "High-pressure adaptor type A101 with external BSP threads (60Â° cone sealing). Material: AISI 316L steel" matches your requirement for a 60Â° cone BSP female fitting (external BSP threads on the adaptor mate with the female 60Â° cone). - Material compatibility: AISI 316L (stainless steel) matches your AISI 316L media and offers excellent corrosion resistance for high-pressure applications. - Sealing: The 60Â° cone sealing design is intended to create a metal-to-metal high-pressure seal with BSP cone female fittings, suitable for high-pressure service when properly installed. Notes/considerations: - Ensure thread size and pitch of the adaptor exactly match your female BSP fitting (BSPP vs BSPT and the specific nominal size). - Verify pressure rating of the specific A101 part number against your system operating pressure and temperature. - Use correct installation torque and any required sealing components (gaskets, ferrules) per manufacturer instructions. If you provide the exact BSP size and operating pressure/temperature, I can confirm fit and safety precisely.

Can the Adaptor with GZ BSP, stainless steel, type A101 withstand corrosion in chloride-rich environments when made from AISI 316L?

Adaptor with GZ BSP, stainless steel, type A101 Format: AISI 316L offers good general corrosion resistance and enhanced pitting/crevice corrosion resistance versus 304 in chloride-containing environments. It is suitable for many chloride-rich applications at ambient to moderately elevated temperatures. However, 316L is not fully immune to chloride-induced corrosion; risk increases with higher chloride concentration, temperature, presence of tensile stresses, or stagnant crevices. For severe chloride environments (e.g., seawater, splash zones, high temperature brines) or where maximum resistance is required, consider duplex stainless steels, superaustenitic alloys (e.g., 6Mo), or have the component cathodically protected. Inspect and maintain threaded/cone sealing areas to avoid crevice corrosion.

Does the Adaptor with GZ BSP, stainless steel, type A101 support hydrogen service at high pressures?

Adaptor with GZ BSP, stainless steel, type A101: based on the provided description. "High-pressure adaptor type A101 with external BSP threads (60Â° cone sealing). Material: AISI 316L steel.". some relevant points regarding hydrogen service at high pressures: - Material suitability: AISI 316L stainless steel is commonly used for hydrogen service because of good corrosion resistance and acceptable mechanical properties. However, hydrogen embrittlement risk depends on pressure, temperature, microstructure, and presence of tensile stresses. 316L is less susceptible than high-strength steels but not immune. - Sealing and thread design: The adaptor uses external BSP threads with a 60Â° cone sealing. Threaded cone seals can work in high-pressure hydrogen if properly torqued and matched to a compatible mating part and if sealing surfaces and any sealants/threads are compatible with hydrogen. Some thread geometries and sealing methods may leak under hydrogen's small molecules unless specified for hydrogen. - Pressure rating and testing: The description does not state a specific pressure rating, hydrogen compatibility certification, or testing (e.g., burst, leak, or hydrogen-specific standards). High-pressure hydrogen service requires documented pressure ratings, hydrogen leak testing, and often compliance with standards (e.g., ISO, ASME, EN) for hydrogen fittings. - Additional considerations: Temperature, cyclic loading, contaminants, and use of appropriate lubricants/anti-seize compatible with hydrogen are important. For safety, fittings for high-pressure hydrogen often require low-permeation seals, welds or certified metal-to-metal connections rather than generic threaded adaptors. Conclusion: With only the provided description, it is not possible to definitively confirm that Adaptor with GZ BSP, stainless steel, type A101 supports high-pressure hydrogen service. While the AISI 316L material and cone-seal design can be compatible in many cases, you need the adaptor's certified pressure rating for hydrogen, hydrogen-specific testing/certification, and installation details from the manufacturer before using it for high-pressure hydrogen.

Adapter with BSP male, stainless steel, type A101

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel

High-pressure adapter type A101 with BSP male thread (60° cone sealing). Material: AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A101-02-02-SS	Adapter 1/8" BSP male / 1/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-02-04-SS	Adapter 1/8" BSP male / 1/4" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-02-06-SS	Adapter 1/8" BSP male / 3/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-02-08-SS	Adapter 1/8" BSP male / 1/2" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-04-04-SS	Adapter 1/4" BSP male / 1/4" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-04-06-SS	Adapter 1/4" BSP male / 3/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-04-08-SS	Adapter 1/4" BSP male / 1/2" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-06-06-SS	Adapter 3/8" BSP male / 3/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A101-06-08-SS	Adapter 3/8" BSP male / 1/2" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-06-12-SS	Adapter 3/8" BSP male / 3/4" BSP male, AISI 316	-	315	In stock	Enquiry
TI-A101-06-16-SS	Adapter 3/8" BSP male / 1" BSP male, AISI 316	-	250	In stock	Enquiry
TI-A101-08-08-SS	Adapter 1/2" BSP male / 1/2" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-08-10-SS	Adapter 1/2" BSP male / 5/8" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-08-12-SS	Adapter 1/2" BSP male / 3/4" BSP male, AISI 316	-	315	In stock	Enquiry
TI-A101-08-16-SS	Adapter 1/2" BSP male / 1" BSP male, AISI 316	-	250	In stock	Enquiry
TI-A101-10-10-SS	Adapter 5/8" BSP male / 5/8" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A101-10-12-SS	Adapter 5/8" BSP male / 3/4" BSP male, AISI 316	-	315	In stock	Enquiry
TI-A101-12-12-SS	Adapter 3/4" BSP male / 3/4" BSP male, AISI 316	-	315	In stock	Enquiry
TI-A101-12-16-SS	Adapter 3/4" BSP male / 1" BSP male, AISI 316	-	250	In stock	Enquiry
TI-A101-12-20-SS	Adapter 3/4" BSP male / 1.1/4" BSP male, AISI 316	-	200	In stock	Enquiry
TI-A101-16-16-SS	Adapter 1" BSP male / 1" BSP male, AISI 316	-	250	In stock	Enquiry
TI-A101-16-20-SS	Adapter 1" BSP male / 1.1/4" BSP male, AISI 316	-	200	In stock	Enquiry
TI-A101-16-24-SS	Adapter 1" BSP male / 1.1/2" BSP male, AISI 316	-	160	In stock	Enquiry
TI-A101-16-32-SS	Adapter 1" BSP male / 2" BSP male, AISI 316	-	125	In stock	Enquiry
TI-A101-20-20-SS	Adapter 1.1/4" BSP male / 1.1/4" BSP male, AISI 316	-	200	In stock	Enquiry
TI-A101-20-24-SS	Adapter 1.1/4" BSP male / 1.1/2" BSP male, AISI 316	-	160	In stock	Enquiry
TI-A101-20-32-SS	Adapter 1.1/4" BSP male / 2" BSP male, AISI 316	-	125	In stock	Enquiry
TI-A101-24-24-SS	Adapter 1.1/2" BSP male / 1.1/2" BSP male, AISI 316	-	160	In stock	Enquiry
TI-A101-24-32-SS	Adapter 1.1/2" BSP male / 2" BSP male, AISI 316	-	125	In stock	Enquiry
TI-A101-32-32-SS	Adapter 2" BSP male / 2" BSP male, AISI 316	-	125	In stock	Enquiry
TI-A101-32-40-SS	Adapter 2" BSP male / 2.1/2" BSP male, AISI 316	-		In stock	Enquiry