Is the Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 compatible with standard 60Â° cone BSP hose fittings and valves?

Yes. The Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 is compatible with standard 60Â° cone BSP hose fittings and valves. The product description specifies external BSP thread with a 60Â° cone seal and internal BSP thread with a 60Â° cone seal, and the swivel nut is designed for connecting hydraulic flexible hoses and pipes to pumps, valves, quick couplings and similar components. Because both ends use the standard 60Â° cone BSP sealing geometry, the adaptor will properly mate and form a pressure-tight connection with standard 60Â° cone BSP hose fittings and valves of the appropriate sizes and male/female thread types. Ensure you match the correct BSP thread size and type (GZ/GW = male/female) and that pressure ratings and materials are suitable for your system.

Can Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 be used to connect hoses and pipes of different BSP sizes while maintaining leak-free 60Â° cone seals?

Yes. Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 is designed to connect hoses and pipes of different BSP sizes while maintaining 60Â° cone seals. It features an external BSP thread (60Â° cone) and an internal BSP thread (60Â° cone) with a swivel nut, allowing size/type reduction and compatibility between components (hoses, pipes, pumps, valves, quick couplings). Made of galvanized carbon steel, it provides the required sealing geometry for leak-free joints when properly installed, torqued to specification, and used with undamaged matching BSP 60Â° cone fittings and appropriate hydraulic hose/pipe assemblies.

Does the Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 require specific torque for tightening the 60Â° cone seals?

Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104 does not inherently specify a single universal torque value for tightening the 60Â° cone seals in the provided description. Correct tightening of 60Â° cone (BSP/ISO 8434) fittings depends on factors such as thread size, material, surface condition, presence of sealant or lubricant, and installation practice. General guidance: - Tighten until metal-to-metal cone contact is achieved and a leak-free joint is obtained; avoid excessive torque that can deform the cone or threads. - For repeatable results, follow manufacturerâs torque charts or standards for BSP fittings if available; if no chart is provided, use established practice of hand-tightening plus a specified number of wrench turns (commonly 1â1.5 turns for many cone fittings) while monitoring for proper seating. - Use appropriate tools and support the swivel nut to prevent twisting hose assemblies. - After initial assembly, pressurize the system and re-check for leaks; if required, apply small incremental additional turns rather than large torque increases. If you require exact torque values for Hydraulic adaptor - reduction GZ/GW BSP with swivel nut, carbon steel, type A104, obtain the manufacturerâs assembly/tightening specifications or refer to relevant BSP/cone fitting standards for the specific thread size and material.

Hydraulic adaptor – reduction GZ/GW BSP with swivel nut, carbon steel, type A104

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adaptor with external BSP thread (60° cone seal) and internal BSP thread (60° cone seal), with a swivel nut. Used in hydraulic systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction in type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-A104-02-02	Adapter GZ BSP 1/8" / GW BSP 1/8"	-	400
TI-A104-02-04	Adapter GZ BSP 1/8" / GW BSP 1/4"	-	400
TI-A104-04-04	Adaptor GZ BSP 1/4" / GW BSP 1/4"	-	400
TI-A104-04-06	Adaptor GZ BSP 1/4" / GW BSP 3/8"	-	400
TI-A104-04-08	Adaptor GZ BSP 1/4" / GW BSP 1/2"	-	350
TI-A104-06-02	Adaptor GZ BSP 3/8" / GW BSP 1/8"	-	400
TI-A104-06-04	Adapter GZ BSP 3/8" / GW BSP 1/4"	-	400
TI-A104-06-06	Adapter GZ BSP 3/8" / GW BSP 3/8"	-	400
TI-A104-06-08	Adaptor GZ BSP 3/8" / GW BSP 1/2"	-	350
TI-A104-06-12	Adapter GZ BSP 3/8" / GW BSP 3/4"	-	315
TI-A104-08-04	Adaptor GZ BSP 1/2" / GW BSP 1/4"	-	350
TI-A104-08-06	Adaptor GZ BSP 1/2" / GW BSP 3/8"	-	350
TI-A104-08-08	Adaptor GZ BSP 1/2" / GW BSP 1/2"	-	350
TI-A104-08-10	Adaptor GZ BSP 1/2" / GW BSP 5/8"	-	350
TI-A104-08-12	Adaptor GZ BSP 1/2" / GW BSP 3/4"	-	315
TI-A104-08-16	Adaptor GZ BSP 1/2" / GW BSP 1"	-	250
TI-A104-10-10	Adapter GZ BSP 5/8" / GW BSP 5/8"	-	350
TI-A104-12-06	Adapter GZ BSP 3/4" / GW BSP 3/8"	-	315
TI-A104-12-08	Adaptor GZ BSP 3/4" / GW BSP 1/2"	-	315
TI-A104-12-12	Adapter GZ BSP 3/4" / GW BSP 3/4"	-	315
TI-A104-12-16	Adaptor GZ BSP 3/4" / GW BSP 1"	-	250
TI-A104-16-08	Adaptor GZ BSP 1" / GW BSP 1/2"	-	250
TI-A104-16-12	Adaptor GZ BSP 1" / GW BSP 3/4"	-	250
TI-A104-16-16	Adaptor GZ BSP 1" / GW BSP 1"	-	250
TI-A104-16-20	Adaptor GZ BSP 1" / GW BSP 1.1/4"	-	160
TI-A104-20-20	Adaptor GZ BSP 1.1/4" / GW BSP 1.1/4"	-	200
TI-A104-20-24	Adaptor GZ BSP 1.1/4" / GW BSP 1.1/2"	-	160
TI-A104-24-24	Adapter GZ BSP 1.1/2" / GW BSP 1.1/2"	-	160
TI-A104-24-32	Adaptor GZ BSP 1.1/2" / GW BSP 2"	-	160
TI-A104-32-32	Adaptor GZ BSP 2" / GW BSP 2"	-	125

High-pressure adaptor with external BSP thread (60° cone seal) and internal BSP thread (60° cone seal), with a swivel nut. Used in hydraulic systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction in type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.