What is the recommended weight range for the Balancer without automatic locking, 630 series to ensure proper spring lift adjustment and safe operation?

The recommended weight range for the Balancer without automatic locking, 630 series is the range of suspended tool weights for which the spring lift can be properly adjusted to neutralize the load and ensure safe operation. For the Balancer without automatic locking, 630 series the recommended weight range is 1.5 kg to 6.0 kg.

How do I adjust the spring lift on the Balancer without automatic locking, 630 series for different tool weights?

To adjust the spring lift on the Balancer without automatic locking, 630 series for different tool weights: 1. Suspend the tool from the balancer cable and let it hang freely. 2. Locate the spring lift adjustment knob on the balancer body. 3. Turn the knob to increase lift if the tool droops (counteract heavier weight) or decrease lift if the tool rises above the desired working position (tool too light for current setting). 4. Make small incremental adjustments and re-check the tool position until it remains neutrally suspended at the desired working height. 5. Ensure the adjustment matches the tool weight range; operate within the balancerâs specifications (cable 1600 mm, 2 mm stainless steel; housing cast aluminum; operating temp up to +70Â°C). Balancer without automatic locking, 630 series should neutralize the tool weight when properly adjusted.

Can the Balancer without automatic locking, 630 series be used outdoors or in humid environments given its materials and operating temperature?

Yes. the Balancer without automatic locking, 630 series can be used in many outdoor or humid environments, but with some practical limits. Reasons supporting use outdoors/humid: - Housing is cast aluminum, which resists corrosion better than many steels and is commonly used outdoors. - Cable is stainless steel, which offers good corrosion resistance in moist conditions. - Operating temperature up to +70Â°C covers typical outdoor ambient and industrial conditions. Limitations and cautions: - No specific IP/ingress protection rating is given, so protection against direct water jets, immersion, heavy rain or fine dust cannot be guaranteed. Avoid exposure to continuous spray, immersion, or harsh marine environments without additional protection. - Moving parts, springs and internal mechanisms may still be affected by prolonged high humidity, salt air, or contaminants; regular inspection and maintenance are recommended. - For use below freezing or in extreme environments (<0Â°C), chemical exposure, or offshore/salt-spray conditions, confirm suitability with the manufacturer or consider units with specified sealing and corrosion protection. Practical recommendation: - Suitable for general outdoor/humid use if not directly exposed to heavy water ingress or corrosive atmospheres; implement routine maintenance and, if needed, protective covers or additional sealing for harsher conditions.

Balancer without automatic lock, series 630

All products, Other reels/

Additional information

Standard length [m]	10

Balancer without automatic lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics. load capacity spring adjustable is using a knob is found on body. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 1600 mm. thickness cable: 2 mm. Operating temperature: up to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZE-630	Balanser, wire 1.6 m, load 0.4÷1 kg	-	-	In stock	Enquiry
ZE-631	Balanser, wire 1.6 m, load 1÷2 kg	-	-	In stock	Enquiry
ZE-632	Balanser, wire 1.6 m, load 2÷3 kg	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Balancer without automatic lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics. load capacity spring adjustable is using a knob is found on body. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 1600 mm. thickness cable: 2 mm. Operating temperature: up to +70°C.