Is the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel, suitable for outdoor marine environments?

Yes. The Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel is suitable for outdoor marine environments. AISI 316 stainless steel contains molybdenum, which significantly improves corrosion resistance.especially against chloride-induced pitting and crevice corrosion common in seawater and salty atmospheres.compared with AISI 304. The tapeâs durable construction, low-profile lock and smooth inner surface make it robust and safe for long-term external use where exposure to saltwater, spray and humid conditions is expected.

Can the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel, resist corrosion in chemical processing environments?

Yes. The Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel offers enhanced corrosion resistance compared with AISI 304, making it suitable for many chemical processing environments. AISI 316 contains molybdenum, which improves resistance to chlorides, acids and other aggressive media commonly found in chemical plants. While no material is universally impervious, AISI 316 is a standard choice where superior pitting and crevice corrosion resistance is required. For highly aggressive or specific chemical exposures, verify compatibility with the exact chemicals, concentrations, temperatures and exposure conditions used in your process.

How does the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel, perform in high-temperature applications?

The Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel offers good performance in high-temperature applications due to the properties of AISI 316 stainless steel. AISI 316 has higher corrosion resistance and better heat resistance than AISI 304, maintaining mechanical strength and oxidation resistance at elevated temperatures typical for industrial environments. The tapeâs constructionâdurable, low-profile lock and smooth inner surfaceâhelps preserve secure clamping and label retention under thermal cycling and prolonged heat exposure. Practically, AISI 316 can be used continuously up to approximately 870Â°C (1600Â°F) for short periods and about 925Â°C (1700Â°F) for intermittent service, though long-term continuous use is best kept below about 400â600Â°C (750â1100Â°F) to avoid scaling and loss of strength depending on environment and load. In most high-temperature industrial labeling applications (heating equipment, exhausts, ovens, and other elevated-temperature settings), the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 316 steel will maintain integrity, corrosion resistance, and secure locking significantly better than AISI 304. For best results, consider the exact operating temperature, exposure duration, and environmental factors (chlorides, sulfur compounds, acidic atmospheres) that can accelerate high-temperature corrosion. If service temperatures approach the upper limits or environments contain aggressive species, verify suitability with the manufacturer or consider specialized high-temperature alloys or coatings.

Band-It® Tie-Lok® system information label tape, AISI 316 steel

All products, Band clamping system/

Additional information

Material	SS – stainless steel

Mounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, safe, with a low-profile lock and a smooth inner surface. Tape width: 1/4″. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-AS4119	Information label tape, width 1/4", L = 254 mm, AISI 316	-	-	In stock	Enquiry
BD-AS4129	Information label tape, width 1/4", L = 419 mm, AISI 316	-	-	In stock	Enquiry
BD-AS4139	Information label tape, width 1/4", L = 572 mm, AISI 316	-	-	In stock	Enquiry
BD-AS4149	Information label tape, width 1/4", L = 737 mm, AISI 316	-	-	In stock	Enquiry
BD-AS4159	Information label tape, width 1/4", L = 889 mm, AISI 316	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Mounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, safe, with a low-profile lock and a smooth inner surface. Tape width: 1/4″. Material: AISI 316 steel.